{"title":"Søvandsindtag, skroggennemføringer, kugleventiler og fittings til båden","description":"\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eHer finder du \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003esøvandsindtag, skroggennemføringer, kugleventiler og fittings til marineinstallationer\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e. Sortimentet dækker løsninger i \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003emarinemessing, bronze, rustfrit stål og komposit\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, så du kan vælge materialer og dimensioner, der passer til installationen om bord.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eSkroggennemføringer og ventiler er kritiske komponenter på en båd. De anvendes blandt andet til \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ekølevandsindtag til motoren, toilet og septiksystem, afløb, lænsepumper og andre installationer\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, hvor vand skal føres sikkert gennem skroget.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eSkroggennemføringer og søvandsindtag\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eVi fører både almindelige \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eskroggennemføringer\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e samt \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003esøvandsindtag med si\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, der hjælper med at forhindre større urenheder, tang og andet materiale i at komme ind i kølevandssystemet.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eTil installationen finder du også \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ekugleventiler, slangestudse, nipler, bøjninger, T-stykker, reduktioner, muffer, adaptere og øvrige fittings\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, så hele installationen kan sammensættes korrekt.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eVælg det rigtige materiale\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eMarinemessing\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – et klassisk valg til mange marineinstallationer og fittings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eBronze\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – særdeles velegnet til søvandsinstallationer og traditionelt anvendt til skroggennemføringer, søventiler og fittings under vandlinjen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eRustfrit stål\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – giver høj styrke og et flot finish og anvendes til en lang række marineinstallationer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eKomposit\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e – let, korrosionsbestandigt og elektrisk ikke-ledende. Et populært alternativ til traditionelle metaldele, blandt andet til skroggennemføringer og kugleventiler.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eKomplette løsninger til installation under og over vandlinjen\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eUanset om du skal \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eudskifte en eksisterende søventil\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, etablere et nyt søvandsindtag eller bygge en komplet installation, finder du komponenterne her. Vælg den korrekte \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003egevindtype, dimension, slangetilslutning og materiale\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, og vær særligt opmærksom på korrekt materialevalg ved installationer under vandlinjen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eHos Alpina Marine finder du et stort udvalg af \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eskroggennemføringer, søvandsindtag, søventiler, kugleventiler og marine fittings\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e til både motorbåde og sejlbåde.\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"sierra-rorprop-1-4umbarco","title":"Sierra 1\/4 Pipe Plug for Marine Use","description":"\u003cp\u003eThis \u003cstrong\u003eSierra 1\/4 pipe plug\u003c\/strong\u003e is a practical spare part for the service and maintenance of maritime installations.\u003c\/p\u003e\n\n\u003cp\u003eThe pipe plug is used where a 1\/4 opening or connection needs to be closed in a simple and secure manner.\u003c\/p\u003e\n\n\u003cp\u003eA suitable choice for boat service, repair, and replacement where an original Sierra component is desired.\u003c\/p\u003e\n\n\u003cstrong\u003e\u003cem\u003eKey features\u003c\/em\u003e\u003c\/strong\u003e\n\n\u003cp\u003e\nPipe plug in 1\/4 size\u003cbr\u003e\nSuitable for maritime service and maintenance\u003cbr\u003e\nOriginal Sierra spare part\u003cbr\u003e\nFor closing appropriate openings or connections\u003cbr\u003e\nPractical component for boat equipment and repair\n\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":55238300107134,"sku":"18-4257","price":29.0,"currency_code":"DKK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/18-4257.jpg?v=1741076948"},{"product_id":"sierra-slangestuds-1-4x-10mm","title":"Sierra Hose Barb 1\/4\" x 10 mm Male Thread","description":"\u003cp\u003eThis \u003cstrong\u003eSierra hose barb 1\/4\" x 10 mm\u003c\/strong\u003e is intended for hose connections in marine installations where a simple and functional transition with an external thread is desired.\u003c\/p\u003e\u003cp\u003eThe hose barb can be used as part of the boat's hose and fitting systems, where correct dimensions and tight mounting are important for a reliable installation.\u003c\/p\u003e\u003cp\u003eA practical fitting product for maintenance, replacement, or the construction of hose connections on board.\u003c\/p\u003e\u003cstrong\u003e\u003cem\u003eKey features\u003c\/em\u003e\u003c\/strong\u003e\u003cp\u003eHose barb for marine hose installations\u003cbr\u003eDimension 1\/4\" x 10 mm\u003cbr\u003eExternal thread\u003cbr\u003eSuitable for hose connections on board\u003cbr\u003eFrom Sierra marine equipment\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":55238303220094,"sku":"18-8074","price":75.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/18-8074.jpg?v=1741076914"},{"product_id":"sierra-slangestuds-1-4x-6mm","title":"Sierra hose barb 1\/4\" x 6 mm","description":"\u003cp\u003eThis \u003cstrong\u003eSierra hose barb 1\/4\" x 6 mm\u003c\/strong\u003e is a practical fitting for marine hose installations where a simple transition between thread and hose is required.\u003c\/p\u003e\u003cp\u003eThe hose barb is suitable for use in the boat's technical installations, where correct dimensioning and reliable mounting are important.\u003c\/p\u003e\u003cp\u003eThe product is a compact fitting component for service, replacement, or new installation on board.\u003c\/p\u003e\u003cstrong\u003e\u003cem\u003eKey features\u003c\/em\u003e\u003c\/strong\u003e\u003cp\u003eHose barb with 1\/4\" connection\u003cbr\u003eFits 6 mm hose\u003cbr\u003eSuitable for marine installations\u003cbr\u003ePractical spare part for boat equipment\u003cbr\u003eFrom Sierra Marine\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":55238301909374,"sku":"18-8042","price":72.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/18-8042.jpg?v=1741076916"},{"product_id":"sierra-slangestuds-1-8x-10mm","title":"Sierra hose barb 1\/8\" x 10 mm","description":"\u003cp\u003eThis \u003cstrong\u003eSierra hose barb 1\/8\" x 10 mm\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003ePractical hose barb for connecting hoses in the boat's technical installations where a 1\/8\" connection and a 10 mm hose connection are required.\u003c\/p\u003e\n\n\u003cp\u003eSuitable for repair, replacement, or installation in maritime systems where a compact and precise hose barb is needed.\u003c\/p\u003e\n\n\u003cstrong\u003e\u003cem\u003eKey features\u003c\/em\u003e\u003c\/strong\u003e\n\n\u003cp\u003e\n1\/8\" connection\u003cbr\u003e\n10 mm hose connection\u003cbr\u003e\nSuitable for maritime installations\u003cbr\u003e\nFor installation or replacement\u003cbr\u003e\nFrom Sierra marine equipment\n\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":55238329205118,"sku":"18-8073","price":67.0,"currency_code":"DKK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/18-8073.jpg?v=1741076937"},{"product_id":"sierra-slangestuds-1-8x-6mm","title":"Sierra hose barb 1\/8\" x 6 mm","description":"\u003cp\u003eThis \u003cstrong\u003eSierra hose barb 1\/8\" x 6 mm\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe hose barb is used as a transition between a 1\/8\" connection and a 6 mm hose in marine installations where a simple and precise hose connection is required.\u003c\/p\u003e\u003cp\u003eA practical choice for service, repair, and replacement of existing fittings on board when the dimensions must match 1\/8\" x 6 mm.\u003c\/p\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003cp\u003eHose barb with 1\/8\" connection\u003cbr\u003eFits 6 mm hose\u003cbr\u003eSuitable for marine installations\u003cbr\u003eUsed for service and replacement\u003cbr\u003eOriginal Sierra marine equipment\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":55238283919742,"sku":"18-8043","price":72.0,"currency_code":"DKK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/18-8043.jpg?v=1741076889"},{"product_id":"sierra-slangestuds-1-8x-8mm","title":"Sierra hose barb 1\/8\" male thread x 8 mm","description":"\u003cp\u003eThis \u003cstrong\u003eSierra hose barb 1\/8\" x 8 mm\u003c\/strong\u003e is a practical fitting for hose connections in marine installations.\u003c\/p\u003e\u003cp\u003eThe hose barb features a 1\/8\" male thread and is designed for use with 8 mm hose, where a simple and secure transition between thread and hose is required.\u003c\/p\u003e\u003cp\u003eSuitable as a spare part or component for service, repair, and installation of hose systems on board.\u003c\/p\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003cp\u003e1\/8\" male thread\u003cbr\u003eFor 8 mm hose\u003cbr\u003eHose barb for marine installations\u003cbr\u003eSuitable for service and repair\u003cbr\u003eOriginal Sierra component\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":55238303482238,"sku":"18-8054","price":57.0,"currency_code":"DKK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/18-8054.jpg?v=1741076913"},{"product_id":"sierra-slangestuds-3-8x-16mm","title":"Sierra Hose Barb 3\/8\" x 16 mm","description":"\u003cp\u003eThis \u003cstrong\u003eSierra hose barb 3\/8\" x 16 mm\u003c\/strong\u003e is a practical fitting for hose connections in marine installations.\u003c\/p\u003e\u003cp\u003eThe hose barb features an external thread and is designed for connecting a hose to a threaded port, where a simple and functional solution is required.\u003c\/p\u003e\u003cp\u003eA relevant choice for maintenance, replacement, or installation of hose connections on board.\u003c\/p\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003cp\u003eHose barb for marine use\u003cbr\u003eSize 3\/8\" x 16 mm\u003cbr\u003eWith external thread\u003cbr\u003eFor hose connection\u003cbr\u003eSuitable for installation and replacement\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":55238284083582,"sku":"18-8041","price":90.0,"currency_code":"DKK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/18-8041.jpg?v=1741076888"},{"product_id":"sierra-slangestuds-udv-gevind-1-4x-8mm","title":"Sierra Hose Barb 1\/4\" Male Thread to 8 mm Hose","description":"\u003cp\u003eThis \u003cstrong\u003eSierra hose barb with male thread\u003c\/strong\u003e is designed for connecting an 8 mm hose to a 1\/4\" threaded connection.\u003c\/p\u003e\u003cp\u003eThe hose barb is a practical fitting for maritime installations where a simple and precise transition between hose and thread is required.\u003c\/p\u003e\u003cp\u003eSuitable as a spare part or component for servicing, replacing, and building hose connections on board.\u003c\/p\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003cp\u003eHose barb with male thread\u003cbr\u003eThread size 1\/4\"\u003cbr\u003eFor 8 mm hose\u003cbr\u003eSuitable for maritime hose installations\u003cbr\u003eFrom Sierra marine equipment\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":55238302237054,"sku":"18-500-5614","price":32.0,"currency_code":"DKK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/18-500-5614.jpg?v=1741076914"},{"product_id":"sierra-slangestuds-udv-gevind-1-8x-8mm","title":"Sierra Hose Barb 1\/8\" Male Thread x 8 mm","description":"\u003cp\u003eThis \u003cstrong\u003eSierra hose barb with 1\/8\" male thread and 8 mm hose connection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe hose barb is used for connecting a hose to a threaded connection in marine installations where a compact and precise transition is required.\u003c\/p\u003e\u003cp\u003eA relevant choice for maintenance, repair, and replacement of hose connections on board.\u003c\/p\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003cp\u003e1\/8\" male thread\u003cbr\u003e8 mm hose barb\u003cbr\u003eFor hose connections in marine use\u003cbr\u003eCompact transition fitting\u003cbr\u003eProduct from Sierra\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":55238330122622,"sku":"18-500-5618","price":37.0,"currency_code":"DKK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/18-500-5618.jpg?v=1741076936"},{"product_id":"sierra-slangestuds-udv-gevind-3-8x-10mm","title":"Sierra hose barb 3\/8\" male thread for 10 mm hose","description":"\u003cp\u003eThis \u003cstrong\u003eSierra hose barb with external thread\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe hose barb is designed for connecting a 10 mm hose and has a 3\/8\" external thread.\u003c\/p\u003e\u003cp\u003eA practical fitting for maritime installations where a simple and precise hose connection is required.\u003c\/p\u003e\u003cstrong\u003e\u003cem\u003eKey features\u003c\/em\u003e\u003c\/strong\u003e\u003cp\u003eHose barb with external thread\u003cbr\u003e3\/8\" thread size\u003cbr\u003eFits 10 mm hose\u003cbr\u003eSuitable for hose installations in marine equipment\u003cbr\u003eCompact fitting for maritime use\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":55238284247422,"sku":"18-500-3838","price":47.0,"currency_code":"DKK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/18-500-3838.jpg?v=1741076888"},{"product_id":"sierra-vinkel-slangestuds-1-4x-9-5mm","title":"Sierra Elbow Hose Barb 90° 1\/4 NPT x 9.5 mm Brass","description":"\u003cp\u003eThis \u003cstrong\u003eSierra angled hose barb\u003c\/strong\u003e is a 90° brass hose fitting for marine hose connections.\u003c\/p\u003e\n\n\u003cp\u003eThe hose barb has a 3\/8\" hose tail corresponding to 9.5 mm and a 1\/4\" NPT thread, making it suitable for installations where the hose needs to be routed at an angle.\u003c\/p\u003e\n\n\u003cp\u003eThe brass construction provides a robust fitting for use in the boat's technical installations where a compact and angled hose connection is required.\u003c\/p\u003e\n\n\u003cstrong\u003e\u003cem\u003eKey features\u003c\/em\u003e\u003c\/strong\u003e\n\n\u003cp\u003e\n90° angle for compact hose routing\u003cbr\u003e\n3\/8\" hose barb corresponding to 9.5 mm\u003cbr\u003e\n1\/4\" NPT threaded connection\u003cbr\u003e\nMade of brass\u003cbr\u003e\nSuitable for marine hose connections\n\u003c\/p\u003e","brand":"Sierra","offers":[{"title":"Default Title","offer_id":55238356697470,"sku":"18-8067","price":110.0,"currency_code":"DKK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/18-8067.jpg?v=1741076708"},{"product_id":"quicksilver-mercury-connector-30-pipe-p-n-22-8m0058419","title":"Quicksilver stainless steel fuel fitting 1\/4″ NPT x 5\/16″","description":"\u003cp\u003e\u003cb\u003ePrevious part numbers:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e \u003cb\u003eSearch term:\u003c\/b\u003e Spare parts and service parts for outboard motors\u003c\/p\u003e","brand":"Quicksilver","offers":[{"title":"Default Title","offer_id":55510052307326,"sku":"22-8M0058419","price":284.9,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/8m0058419_main.jpg?v=1786974595"},{"product_id":"trudesign-kuglehane-compact-1-2","title":"Trudesign ball valve compact 1\/2\"","description":"\u003cp\u003e Ball valves in several sizes, for mounting above and below the waterline. TruDesign produces an exciting range of glass fiber reinforced polymer plastic parts for marine use.\u003cbr\u003e \u003cbr\u003eAll fittings are certified by IMCI (International Marine Certification Institute in Belgium) and follow ISO 9093-2. All parts are also CE marked.\u003c\/p\u003e","brand":"Trudesign","offers":[{"title":"Default Title","offer_id":55590269452670,"sku":"1068335","price":472.5,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/1068335_XL.jpg?v=1747260550"},{"product_id":"trudesign-kuglehane-compact-3-4","title":"Trudesign ball valve compact 3\/4\"","description":"\u003cp\u003e Ball valves in several sizes, for mounting above and below the waterline. TruDesign produces an exciting range of glass fiber reinforced polymer plastic parts for marine use.\u003cbr\u003e\u003cbr\u003e All fittings are certified by IMCI (International Marine Certification Institute in Belgium) and follow ISO 9093-2. All parts are also CE marked.\u003c\/p\u003e","brand":"Trudesign","offers":[{"title":"Default Title","offer_id":55590269518206,"sku":"1068336","price":443.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/1068336_XL.jpg?v=1747260551"},{"product_id":"trevejshane-typel-3-9","title":"3-way ball valve \"L\" type 3\/8\"","description":"\u003cp\u003eLacquered metal handle. ISO 9093\/1\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSeawater-resistant marine fittings from the Italian company Guidi always feature very high quality and finish.\u003c\/p\u003e","brand":"Guidi","offers":[{"title":"Default Title","offer_id":56340831863166,"sku":"1063210","price":542.5,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/1063210_XL.jpg?v=1759357375"},{"product_id":"trevejshane-typel-1-3","title":"3-way ball valve \"L\" type 1\/2\"","description":"\u003cp\u003eLacquered metal handle. ISO 9093\/1\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSeawater-resistant marine fittings from the Italian company Guidi always feature a very high quality and finish.\u003c\/p\u003e","brand":"Guidi","offers":[{"title":"Default Title","offer_id":56340831109502,"sku":"1063220","price":621.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/1063220_XL.jpg?v=1759357371"},{"product_id":"trevejshane-typel-3-5","title":"3-way ball valve \"L\" port 3\/4\"","description":"\u003cp\u003eLacquered metal handle. ISO 9093\/1\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSeawater-resistant marine fittings from the Italian company Guidi always have a very high quality and finish.\u003c\/p\u003e","brand":"Guidi","offers":[{"title":"Default Title","offer_id":56340829864318,"sku":"1063230","price":1034.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/1063230_XL.jpg?v=1759357366"},{"product_id":"trevejshane-typel-2","title":"3-way L-port ball valve 1\"","description":"\u003cp\u003eLacquered metal handle. ISO 9093\/1\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSeawater-resistant marine fittings from the Italian manufacturer Guidi always feature very high quality and finish.\u003c\/p\u003e","brand":"Guidi","offers":[{"title":"Default Title","offer_id":56340832420222,"sku":"1063240","price":1262.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/1063240_XL.jpg?v=1759357377"},{"product_id":"trevejshane-typel-1-1-5","title":"3-way ball valve type \"L\" 1 1\/4\"","description":"\u003cp\u003eLacquered metal handle. ISO 9093\/1\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSeawater-resistant marine fittings from Italian manufacturer Guidi always feature very high quality and finish.\u003c\/p\u003e","brand":"Guidi","offers":[{"title":"Default Title","offer_id":56340829733246,"sku":"1063250","price":1904.5,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/1063250_XL.jpg?v=1759357366"},{"product_id":"trevejshane-typel-1-1-3","title":"Three-way ball valve type \"L\" 1 1\/2\"","description":"\u003cp\u003eLacquered metal handle. ISO 9093\/1\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSeawater-resistant marine fittings from the Italian company Guidi always have a very high quality and finish.\u003c\/p\u003e","brand":"Guidi","offers":[{"title":"Default Title","offer_id":56340832059774,"sku":"1063260","price":2616.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/1063260_XL.jpg?v=1759357377"},{"product_id":"kontraventil-messing-3-9","title":"Check valve brass 3\/8\"","description":"\u003cp\u003eSeawater-resistant marine fittings from the Italian company Guidi always have a very high quality and finish.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eGuidi marine brass is manufactured with an alloy containing less zinc than standard brass fittings. This provides far better durability in the harsh marine environment.\u003c\/p\u003e","brand":"Guidi","offers":[{"title":"Default Title","offer_id":56340831273342,"sku":"1063500","price":100.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/1063500_XL_6cfbce65-2465-45ce-88fe-637fd55352b0.jpg?v=1759357372"},{"product_id":"kontraventil-messing-1-3","title":"Non-return valve brass 1\/2\"","description":"\u003cp\u003eSeawater-resistant marine fittings from the Italian manufacturer Guidi are always of a very high quality and finish.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eGuidi marine brass is manufactured with an alloy containing less zinc than standard brass fittings. This provides far better durability in the harsh marine environment.\u003c\/p\u003e","brand":"Guidi","offers":[{"title":"Default Title","offer_id":56340829995390,"sku":"1063510","price":118.5,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/1063510_XL_2bba34d8-eb5e-430b-9a16-6ec5f08b732d.jpg?v=1759357367"},{"product_id":"kontraventil-messing-3-5","title":"Non-return valve brass 3\/4\"","description":"\u003cp\u003eSeawater-resistant marine fittings from the Italian manufacturer Guidi are always of a very high quality and finish.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eGuidi marine brass is manufactured with an alloy containing less zinc than standard brass fittings. This provides far better durability in the harsh marine environment.\u003c\/p\u003e","brand":"Guidi","offers":[{"title":"Default Title","offer_id":56340832584062,"sku":"1063520","price":116.5,"currency_code":"DKK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/1063520_XL_ff2d09c3-9ccc-4571-a175-d0f4e8bb1539.jpg?v=1759357379"},{"product_id":"kontraventil-messing-2","title":"Non-return valve brass 1\"","description":"\u003cp\u003eSeawater-resistant marine fittings from Italian manufacturer Guidi are always of a very high quality and finish.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eGuidi marine brass is manufactured with an alloy containing less zinc than standard brass fittings. This provides far greater durability in the harsh marine environment.\u003c\/p\u003e","brand":"Guidi","offers":[{"title":"Default Title","offer_id":56340829897086,"sku":"1063530","price":156.5,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/1063530_XL_ea212d37-4a9c-49be-b31c-0f61267a1fe9.jpg?v=1759357367"},{"product_id":"kontraventil-messing-1-1-3","title":"Brass check valve 1 1\/2\"","description":"\u003cp\u003eSeawater-resistant marine fittings from Italian manufacturer Guidi are always of very high quality and finish.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eGuidi marine brass is manufactured with an alloy containing less zinc than standard brass fittings. This provides far better durability in the harsh marine environment.\u003c\/p\u003e","brand":"Guidi","offers":[{"title":"Default Title","offer_id":56340832387454,"sku":"1063540","price":290.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/1063540_XL_d83d1512-8206-4abf-a8fa-723bcf59dd5c.jpg?v=1759357377"},{"product_id":"whale-sugefilter-med-justerbar-slangestuds-og-kontraventil-19-mm-17-710-19","title":"Whale suction strainer with adjustable hose barb and non-return valve, 19 mm","description":"\u003cp\u003eThis \u003cstrong\u003eWhale strainer\u003c\/strong\u003e model SB3422 is an adjustable filter for the suction side of pumps in marine bilge and pump systems. The filter has a 19 mm \/ 3\/4\" hose barb and can be used with both manual and electric pumps. It is particularly suitable for the Whale Gulper 320.\u003c\/p\u003e\u003cp\u003eThe integrated non-return valve limits backflow to the bilge area and helps maintain pump priming. The filter screen retains larger debris before it reaches the suction hose and the pump, and the removable filter grid allows access for cleaning and inspection.\u003c\/p\u003e\u003cp\u003eThe multi-directional hose barb can be set in four positions for top or side entry. This provides flexible hose routing, especially where installation space is limited. The design also prevents the end of the suction hose from suctioning onto a flat surface.\u003c\/p\u003e\u003cp\u003eThe filter measures 145 × 60 × 52 mm and is manufactured with polypropylene, nitrile, and stainless steel components. It is mounted at the end of the pump's suction hose and placed low in the bilge area so that the pump can remove a large portion of the collected water.\u003c\/p\u003e\u003cp\u003eThe SB3422 is compatible with the Whale Gulper 320 BP2052 12 V and BP2054 24 V. It can also be used with the Gulper 320 variants with part nos. 16.156.15, 16.156.12, and 16.156.24, when the installation uses a 19 mm \/ 3\/4\" suction hose.\u003c\/p\u003e\u003cstrong\u003e\u003cem\u003eKey features\u003c\/em\u003e\u003c\/strong\u003e\u003cp\u003e19 mm \/ 3\/4\" hose barb\u003cbr\u003eAdjustable barb with four positions\u003cbr\u003eTop or side routing of the suction hose\u003cbr\u003eIntegrated non-return valve\u003cbr\u003eRemovable filter grid for cleaning and inspection\u003cbr\u003eFor manual and electric pumps\u003cbr\u003eParticularly suitable for the Whale Gulper 320\u003cbr\u003eProduct dimensions: 145 × 60 × 52 mm\u003c\/p\u003e","brand":"Whale","offers":[{"title":"Default Title","offer_id":57173319745918,"sku":"17.710.19","price":339.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/17.710.19c.jpg?v=1774539821"},{"product_id":"universel-motorskyller-til-indenbordsmotorer-690-1210-mm-52-752-02","title":"Universal motor flusher for inboard engines, 690-1210 mm","description":"\u003cp\u003eThis \u003cstrong\u003euniversal motor flusher for inboard engines\u003c\/strong\u003e is intended for temporary freshwater supply through the boat's existing raw water intake. This version has an adjustable length of 690-1210 mm and is used while the boat is on land.\u003c\/p\u003e\u003cp\u003eThe rubber suction cup is placed over the raw water intake on the underside of the hull. The telescopic support tube is adjusted against the ground so that the cup is held pressed in place during flushing.\u003c\/p\u003e\u003cp\u003eThe suction cup has a diameter of 140 mm and is made of rubber. The adjustable telescopic tube is made of aluminum and makes it possible to adapt the support to the distance between the raw water intake and the ground.\u003c\/p\u003e\u003cp\u003eThe water hose is connected via a universal garden hose-type click connector. The design requires no permanent installation on the boat and can be removed again after use.\u003c\/p\u003e\u003cstrong\u003e\u003cem\u003eKey features\u003c\/em\u003e\u003c\/strong\u003e\u003cp\u003eFor freshwater flushing via the boat's raw water intake\u003cbr\u003eFor inboard engines\u003cbr\u003eAdjustable length: 690-1210 mm\u003cbr\u003eRubber suction cup: Ø 140 mm\u003cbr\u003eAluminum telescopic tube\u003cbr\u003eUniversal garden hose-type click connector\u003cbr\u003eTemporary mounting with support against the ground\u003cbr\u003eDesigned for use while the boat is on land\u003c\/p\u003e","brand":"Osculati","offers":[{"title":"Default Title","offer_id":57473231487358,"sku":"52.752.02","price":249.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/52.752.01-02_13e139fa-4d6e-437e-af9a-bd234866b2bd.jpg?v=1779888231"},{"product_id":"universal-skyllemuffe-til-indenbordsmotorer-160-x-97-mm-52-749-20","title":"Universal flushing muff for inboard engines 160 × 97 mm","description":"\u003cp\u003eThis \u003cstrong\u003euniversal flush muff for inboard engines\u003c\/strong\u003e is mounted over the engine's raw water intake and used to supply flushing water through the normal cooling water intake. It is designed for raw water intakes from 3\/8\" to 2\" and measures 160 × 97 mm.\u003c\/p\u003e\u003cp\u003eThe flush muff is secured with a T-shaped pin, which is inserted through the slots in the raw water intake. The design keeps the muff positioned over the intake during flushing and therefore requires a raw water intake with suitable slots for the T-pin.\u003c\/p\u003e\u003cp\u003eThe water connection consists of a 3\/4\" BSP threaded stud. A separate snap-coupling adapter with item no. 36.189.04 can be screwed onto the thread so that a suitable water hose can be connected with a snap coupling. The adapter is not included.\u003c\/p\u003e\u003cp\u003eThe product is universal within the specified intake range, but is not tied to a specific engine brand or engine model. Before use, check that the muff can cover the raw water intake and that the T-pin can be securely held in the intake slots.\u003c\/p\u003e\u003cstrong\u003e\u003cem\u003eImportant features\u003c\/em\u003e\u003c\/strong\u003e\u003cp\u003eFor flushing inboard engines\u003cbr\u003eMounted over the engine's raw water intake\u003cbr\u003eFits raw water intakes from 3\/8\" to 2\"\u003cbr\u003eSecured with a T-shaped pin through the intake slots\u003cbr\u003e3\/4\" BSP threaded stud for water connection\u003cbr\u003eProduct dimensions: 160 × 97 mm\u003cbr\u003eSnap-coupling adapter 36.189.04 can be purchased separately\u003c\/p\u003e","brand":"Osculati","offers":[{"title":"Default Title","offer_id":57518702264702,"sku":"52.749.20","price":593.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/EN_52.749.20_New2021.jpg?v=1780717323"},{"product_id":"installationssaet-til-elektrisk-baadtoilet-50-205-03","title":"Installation kit for electric marine toilet","description":"\u003cp\u003eThis \u003cstrong\u003einstallation kit for boat toilets\u003c\/strong\u003e is intended for the installation of an electric boat toilet. The kit gathers the documented through-hull, valve, and hose connection parts required for the installation.\u003c\/p\u003e\u003cp\u003eThe kit contains two full-bore ball valves with 1\/2\" and 3\/4\" internal threads. The valve bodies are made of nickel-plated brass, while the handles are made of stainless steel. The ball valves have a pressure rating of PN25 and long threads in accordance with ISO 9093.\u003c\/p\u003e\u003cp\u003eFor hose connection, two cast brass hose tails with external threads are included: 1\/2\" × 20 mm and 3\/4\" × 25 mm. The kit also includes two fully threaded brass skin fittings with a rounded head and thread sizes of 1\/2\" and 3\/4\".\u003c\/p\u003e\u003cp\u003eThe 1\/2\" skin fitting has component dimensions of L 65 mm, Ø D 40 mm, and Ø G 21 mm. The 3\/4\" skin fitting has component dimensions of L 70 mm, Ø D 48 mm, and Ø G 26 mm. The dimensions apply to the individual fittings and not the entire installation kit.\u003c\/p\u003e\u003cp\u003eThe six included components have the part numbers 17.228.02, 17.228.03, 17.198.09, 17.198.12, 17.321.81, and 17.321.82. The kit is not tied to a specific toilet brand or electrical voltage.\u003c\/p\u003e\u003cstrong\u003e\u003cem\u003eKey features\u003c\/em\u003e\u003c\/strong\u003e\u003cp\u003eFor electric boat toilet\u003cbr\u003e2 full-bore ball valves: 1\/2\" and 3\/4\"\u003cbr\u003eNickel-plated brass ball valves, PN25\u003cbr\u003eStainless steel valve handles\u003cbr\u003e2 hose tails: 1\/2\" × 20 mm and 3\/4\" × 25 mm\u003cbr\u003e2 fully threaded skin fittings: 1\/2\" and 3\/4\"\u003cbr\u003eLong valve threads in accordance with ISO 9093\u003c\/p\u003e","brand":"Osculati","offers":[{"title":"Default Title","offer_id":57556544586110,"sku":"50.205.03","price":519.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/50.205.0x_80c6d563-1d09-405b-aecb-8169340fa13d.jpg?v=1781610522"},{"product_id":"90-paafyldningstilslutning-med-slangestuds-oe-38-mm-til-stiv-vandtank-52-199-38","title":"90° filler neck with 38 mm hose barb for rigid water tank","description":"\u003cp\u003eThis \u003cstrong\u003e90° tank connection with hose barb for rigid water tank\u003c\/strong\u003e is a filling variant with a nominal hose connection of Ø 38 mm. It is used to lead water from the filling hose into a rigid water tank.\u003c\/p\u003e\u003cp\u003eThe connection is made of nylon and designed as a 90° elbow fitting. The angled design leads the hose along the tank and is suitable where installation space does not allow for a straight hose connection.\u003c\/p\u003e\u003cp\u003eThe tank connection is intended for through-mounting in the tank wall. The design features a flange, a hose barb, and a thread\/locking area that allows the connection to be secured from the opposite side of the tank wall. The mounting hole, thread dimension, and permissible tank wall thickness are not specified and should therefore be checked for the specific installation.\u003c\/p\u003e\u003cp\u003eThe variant is specifically intended for water filling and a hose with a nominal diameter of 38 mm. It is not documented for fuel, wastewater, or chemical tanks.\u003c\/p\u003e\u003cstrong\u003e\u003cem\u003eKey features\u003c\/em\u003e\u003c\/strong\u003e\u003cp\u003eFilling connection for rigid water tank\u003cbr\u003e90° angled design\u003cbr\u003eHose barb for Ø 38 mm hose\u003cbr\u003eMade of nylon\u003cbr\u003eIntended for through-tank mounting\u003cbr\u003eSales unit: 1 pc.\u003c\/p\u003e","brand":"-","offers":[{"title":"Default Title","offer_id":57556558414206,"sku":"52.199.38","price":142.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/52.199.16-38_dis_a3c490e1-607c-42ad-87b5-6f615d04f134.jpg?v=1781610717"},{"product_id":"installationssaet-til-manuelt-marintoilet-50-205-02","title":"Installation kit for manual marine toilet","description":"\u003cp\u003e\u003cstrong\u003eInstallation kit for marine toilet\u003c\/strong\u003e in a manual version with the necessary brass components for establishing seawater intake and discharge through the hull. The kit is designed for manual marine toilets and features 1\/2\" and 1 1\/4\" connections.\u003c\/p\u003e\u003cp\u003eThe kit includes two full-bore female\/female ball valves in nickel-plated brass, two fully threaded hull skin fittings with a rounded head in yellow brass, and two male hose adapters in cast and machined brass. The ball valves have stainless steel handles, a PN25 pressure rating, and long threads according to ISO 9093.\u003c\/p\u003e\u003cp\u003eThe smaller connection consists of a 1\/2\" ball valve, a 1\/2\" skin fitting, and a hose adapter with a 1\/2\" male thread and Ø 20 mm hose barb. The larger connection consists similarly of components with 1 1\/4\" threads and a hose adapter with a Ø 39 mm hose barb.\u003c\/p\u003e\u003cp\u003eThe 1\/2\" skin fitting has a length of 65 mm as well as component dimensions D 40 mm and G 21 mm. The 1 1\/4\" version has a length of 85 mm as well as component dimensions D 65 mm and G 42 mm. The dimensions apply to the individual skin fittings and not the complete installation kit.\u003c\/p\u003e\u003ch3\u003eIncluded components\u003c\/h3\u003e\u003cp\u003e17.228.02 – nickel-plated brass ball valve, 1\/2\"\u003cbr\u003e17.228.05 – nickel-plated brass ball valve, 1 1\/4\"\u003cbr\u003e17.198.09 – brass male hose adapter, 1\/2\" × Ø 20 mm\u003cbr\u003e17.198.18 – brass male hose adapter, 1 1\/4\" × Ø 39 mm\u003cbr\u003e17.321.81 – yellow brass skin fitting, 1\/2\"\u003cbr\u003e17.321.84 – yellow brass skin fitting, 1 1\/4\"\u003c\/p\u003e\u003cp\u003eThe kit comprises the six listed components. The marine toilet, hoses, hose clamps, and other installation parts are not included.\u003c\/p\u003e\u003cstrong\u003e\u003cem\u003eKey features\u003c\/em\u003e\u003c\/strong\u003e\u003cp\u003eFor installation of manual marine toilet\u003cbr\u003eComplete kit with two ball valves, two skin fittings, and two hose adapters\u003cbr\u003eThread sizes: 1\/2\" and 1 1\/4\"\u003cbr\u003eHose barbs: Ø 20 mm and Ø 39 mm\u003cbr\u003eFull-bore female\/female nickel-plated brass ball valves\u003cbr\u003eSkin fittings with rounded head in yellow brass\u003cbr\u003eBall valves with PN25 pressure rating\u003cbr\u003eLong valve threads according to ISO 9093\u003c\/p\u003e","brand":"Osculati","offers":[{"title":"Default Title","offer_id":57556559528318,"sku":"50.205.02","price":850.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/50.205.0x_8356e0f9-e46b-4f6e-8d53-9c3567e4818a.jpg?v=1781610735"},{"product_id":"90-slangetilslutning-til-stiv-vandtank-udloeb-eller-udluftning-oe-16-mm-52-199-16","title":"90° hose connection for rigid water tank – outlet or vent, Ø 16 mm","description":"\u003cp\u003eThis \u003cstrong\u003e90° hose connector for rigid water tank\u003c\/strong\u003e is intended for use as a water outlet or tank vent. The variant features a hose barb for Ø 16 mm hose and provides an angled connection between the tank and the connected hose.\u003c\/p\u003e\u003cp\u003eThe connector is made of nylon and designed as a 90° elbow fitting. The angled construction allows the hose to be routed parallel to the tank wall after connection, where the installation space permits.\u003c\/p\u003e\u003cp\u003eThe tank connector is mounted through the tank wall. The design includes a flange, a threaded through-part, and a fastening part so that it can be secured to a rigid water tank. Dimensions for the mounting hole, thread, and permitted tank wall thickness are not specified.\u003c\/p\u003e\u003cp\u003eThe same variant can be used either as the tank's outlet or as a vent depending on the installation. Hose dimensions and application should be checked before installation, as Ø 16 mm indicates the hose barb connection size and not the product's overall diameter or mounting hole.\u003c\/p\u003e\u003cstrong\u003e\u003cem\u003eKey features\u003c\/em\u003e\u003c\/strong\u003e\u003cp\u003eFor outlet or venting on a rigid water tank\u003cbr\u003eHose barb for Ø 16 mm hose\u003cbr\u003e90° angled elbow construction\u003cbr\u003eMade of nylon\u003cbr\u003eThrough-wall tank mounting\u003cbr\u003eSupplied as 1 pc.\u003c\/p\u003e","brand":"-","offers":[{"title":"Default Title","offer_id":57556560281982,"sku":"52.199.16","price":132.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/52.199.16-38_dis_fafbf036-5f23-42f8-99d3-5eaa7e247753.jpg?v=1781610750"},{"product_id":"whale-inline-kontraventil-19-25-mm-17-121-90","title":"Whale inline non-return valve 19\/25 mm","description":"\u003cp\u003eThis \u003cstrong\u003eWhale inline non-return valve\u003c\/strong\u003e is a mechanical one-way valve for 19 and 25 mm hoses. It is mounted directly into the hose run and prevents fluid from flowing back through a suction or discharge line.\u003c\/p\u003e\u003cp\u003eThe valve uses a nitrile duckbill valve, which opens in the direction of flow and closes against backflow. The design also helps maintain the fluid column and pump prime when the installation and the chosen pump allow it.\u003c\/p\u003e\u003cp\u003eThe combined hose tails fit flexible hoses with an internal diameter of 19 or 25 mm, corresponding to 3\/4\" and 1\". The universal version can be used with both manual and electric pumps in systems such as bilge, greywater, shower drain, and toilet waste systems.\u003c\/p\u003e\u003cp\u003eThe valve body is made of polypropylene, specifically glass-filled polypropylene, while the valve insert itself is made of nitrile. The straight inline design makes the valve suitable where a compact non-return valve needs to be installed directly between two hoses.\u003c\/p\u003e\u003cp\u003eThe model has manufacturer number LV1219 and is specifically indicated as the recommended non-return valve for the Whale Supersub 500 bilge pump, model SS5012. Compatibility is not limited to this pump, provided the hose size and installation are otherwise suitable.\u003c\/p\u003e\u003cstrong\u003e\u003cem\u003eKey features\u003c\/em\u003e\u003c\/strong\u003e\u003cp\u003ePrevents backflow in the hose run\u003cbr\u003eHelps maintain pump prime\u003cbr\u003eNitrile duckbill valve\u003cbr\u003ePolypropylene body\u003cbr\u003eCombined hose tails for 19 and 25 mm hose\u003cbr\u003eFits 3\/4\" and 1\" hose\u003cbr\u003eInline mounting in suction or discharge line\u003cbr\u003eSuitable for manual and electric pumps\u003cbr\u003eUniversal version\u003cbr\u003eManufacturer number LV1219\u003c\/p\u003e","brand":"Whale","offers":[{"title":"Default Title","offer_id":57869549928830,"sku":"17.121.90","price":169.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/17.121.90_4bc05073-6283-4b7a-9be3-99702cd8c532.jpg?v=1787165141"},{"product_id":"whale-quick-connect-15-mm-adapter-med-1-2-bsp-hungevind-messing-17-815-33","title":"Whale Quick Connect 15 mm adapter with 1\/2\" BSP female thread, brass","description":"\u003cp\u003eThis \u003cstrong\u003eWhale Quick Connect 15 mm adapter\u003c\/strong\u003e is a straight transition fitting between a 15 mm semi-rigid Whale pipe and a component with a 1\/2\" BSP male thread. The adapter is intended for hot and cold water installations in marine water systems.\u003c\/p\u003e\u003cp\u003eThe pipe side uses a tool-free push-fit connection. The pipe is pushed in to the second internal stop, where the Double Gripper construction secures it at both high and fluctuating pressures. The Cage Collet design reduces the risk of leakage when installed close to pipe bends, while the integrated shield protects against accidental release.\u003c\/p\u003e\u003cp\u003eThe adapter is designed as a brass variant with a 1\/2\" BSP female thread. The brass coupling is lead-free according to US federal regulations and is suitable for drinking water. The system can be used at up to 12 bar at 20 °C for cold water and up to 6 bar at 65 °C for hot water.\u003c\/p\u003e\u003cp\u003eAssembly requires neither special tools, separate locking clips, nor pipe inserts. The pipe must be cut with a straight and clean cut and pushed fully into the fitting. For disassembly, the grey collet is pressed in towards the adapter while the pipe is pulled out. The fitting can be mounted and removed again without replacing fitting parts.\u003c\/p\u003e\u003cp\u003eThe adapter is intended for Whale Quick Connect 15 mm pipe, including blue cold water pipe with item no. 17.815.52 and red hot water pipe with item no. 17.815.54. Pipe cutter WX7950 can be used to make a clean, perpendicular cut in the semi-rigid pipes. Quick Connect pipe fittings are covered by a 10-year warranty.\u003c\/p\u003e\u003cstrong\u003e\u003cem\u003eKey features\u003c\/em\u003e\u003c\/strong\u003e\u003cp\u003eStraight transition from 15 mm Quick Connect pipe to 1\/2\" BSP female thread\u003cbr\u003eTool-free push-fit assembly\u003cbr\u003eBrass variant with lead-free brass coupling\u003cbr\u003eSuitable for drinking water as well as hot and cold water\u003cbr\u003eMax. 12 bar at 20 °C and 6 bar at 65 °C\u003cbr\u003eDouble Gripper retention and protected Cage Collet\u003cbr\u003eRequires no separate locking clips or pipe inserts\u003cbr\u003eCan be disassembled and reassembled\u003cbr\u003eManufacturer part number WX1533B\u003c\/p\u003e","brand":"Whale","offers":[{"title":"Default Title","offer_id":57871394570622,"sku":"17.815.33","price":338.03,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/17.815.33_f6befb8f-52ad-478f-a9e9-cad2691d3f48.jpg?v=1787195161"},{"product_id":"whale-quick-connect-15-mm-adapter-med-3-8-bsp-udvendigt-gevind-17-815-83","title":"Whale Quick Connect 15 mm adapter with 3\/8\" BSP male thread","description":"\u003cp\u003eThis \u003cstrong\u003eWhale Quick Connect 15 mm adapter\u003c\/strong\u003e is a straight transition fitting from a 15 mm Quick Connect pipe to a component with a 3\/8\" BSP internal thread. The threaded side of the adapter has a 3\/8\" BSP external thread and is designed for marine cold or hot water installations.\u003c\/p\u003e\u003cp\u003eThe pipe side features a tool-free push-fit connection for Whale semi-rigid pipes with a 15 mm outer diameter. The pipe is cut square and pushed fully into the fitting. No pipe insert, separate locking clip, or special tools are required, and the connection can be disconnected and reused.\u003c\/p\u003e\u003cp\u003eThe Double Gripper design secures the pipe against pressure variations, while the supported O-ring prevents deformation and leakage. A protective outer collar reduces the risk of accidental release. The adapter is constructed as a high-strength, single-piece molding in glass-reinforced polypropylene.\u003c\/p\u003e\u003cp\u003eThe Quick Connect system can be used at up to 12 bar at 20 °C for cold water and up to 6 bar at 65 °C for hot water. Pressure and temperature should always be considered as related operating points.\u003c\/p\u003e\u003cp\u003eThe adapter has the manufacturer number WX1583. WX1583B denotes the bulk version of the same fitting type. It can be used, among other things, for connecting a Whale Swim 'n' Rinse Compact RT3000 to a Whale Quick Connect 15 mm piping system; the shower is not included. Supplied as one adapter.\u003c\/p\u003e\u003cstrong\u003e\u003cem\u003eKey features\u003c\/em\u003e\u003c\/strong\u003e\u003cp\u003eStraight transition adapter for Whale Quick Connect 15 mm\u003cbr\u003e3\/8\" BSP external thread\u003cbr\u003eTool-free push-fit installation\u003cbr\u003eCan be disconnected and reused\u003cbr\u003eRequires no pipe insert or separate locking clip\u003cbr\u003eGlass-reinforced polypropylene\u003cbr\u003eCold water: max. 12 bar at 20 °C\u003cbr\u003eHot water: max. 6 bar at 65 °C\u003c\/p\u003e","brand":"Whale","offers":[{"title":"Default Title","offer_id":57871394603390,"sku":"17.815.83","price":42.89,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/17.815.83_fa4ae96c-97b8-4627-9f63-1e59db63846c.jpg?v=1787195163"},{"product_id":"whale-quick-connect-15-mm-afspaerringsventil-i-messing-hun-han-17-815-75","title":"Whale Quick Connect 15 mm brass shut-off valve, female\/male","description":"\u003cp\u003eThis \u003cstrong\u003eWhale Quick Connect 15 mm brass shut-off valve, female\/male\u003c\/strong\u003e is a manual inline valve for shutting off the flow in marine pipe and pressurized water systems. The valve is part of the Whale Quick Connect 15 mm system and has manufacturer number WX1575B.\u003c\/p\u003e\u003cp\u003eThe connections consist of one 15 mm Quick Connect female\/socket connection and one 15 mm Quick Connect male\/stem connection. The valve is designed for pipes with an external diameter of 15 mm. No threads are used on this variant.\u003c\/p\u003e\u003cp\u003eThe Quick Connect system provides a watertight connection without the need for special tools, pipe inserts, or separate locking clips. The Double Gripper design retains the pipe at high pressure, while the cage collet supports the pipe and reduces the risk of leaks at sharp pipe bends. An external sleeve protects against accidental release, and inspection marks help verify that the pipe is inserted correctly.\u003c\/p\u003e\u003cp\u003eThe connection can be assembled and disassembled without tools or replacement parts. The system's maximum pressure is 12 bar at 20 °C and 6 bar at 65 °C. Whale recommends use with Whale pipework, which the system is developed for. The Quick Connect piping system has a 10-year warranty.\u003c\/p\u003e\u003cstrong\u003e\u003cem\u003eKey features\u003c\/em\u003e\u003c\/strong\u003e\u003cp\u003eManual flow shut-off\u003cbr\u003e15 mm Quick Connect female\/male connection\u003cbr\u003eBrass valve\u003cbr\u003eFor pipes with 15 mm external diameter\u003cbr\u003eTool-free assembly and disassembly\u003cbr\u003eDouble Gripper retention\u003cbr\u003eMax. 12 bar at 20 °C\u003cbr\u003eMax. 6 bar at 65 °C\u003c\/p\u003e","brand":"Whale","offers":[{"title":"Default Title","offer_id":57871394636158,"sku":"17.815.75","price":361.13,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/17.815.75_New2020_2c0bc18d-4cc1-4051-a7e2-1f3db15ec01b.jpg?v=1787195164"},{"product_id":"whale-quick-connect-15-mm-endeprop-17-815-46","title":"Whale Quick Connect 15 mm plug","description":"\u003cp\u003e\u003cstrong\u003eWhale Quick Connect 15 mm end stop\u003c\/strong\u003e seals the end of a 15 mm pipe in the Whale Quick Connect system. It is intended for hot and cold water installations and can be used for the permanent or temporary termination of a pipeline during installation, modification, service, or repair.\u003c\/p\u003e\u003cp\u003eThe end stop is installed using the system's push-fit connection without soldering, glue, or special tools. The Double Gripper design secures the pipe, while an internal support ring keeps the O-ring in place. An outer sleeve protects the release collar and reduces the risk of the pipe being released accidentally. No separate locking clips are required.\u003c\/p\u003e\u003cp\u003eThe connection is intended for 15 mm pipes with a 15 mm outside diameter. It withstands a maximum of 12 bar at 20 °C in cold water installations and 6 bar at 65 °C in hot water installations. The construction is made of plastic and provides a corrosion-free, tight, and reusable connection.\u003c\/p\u003e\u003cp\u003eFor installation, the pipe is cut clean and perpendicular, after which it is pushed into the end stop to the second internal stop. For disassembly, the gray release collar is pressed in towards the fitting while the pipe is pulled out. The component can then be reused.\u003c\/p\u003e\u003cp\u003eThe end stop must be used together with Whale Quick Connect 15 mm plastic pipes and the system's grooved Whale stems. It is suitable for, among other things, the color-coded blue cold water pipes and red hot water pipes. The manufacturer number is WX1546B, which replaces the previous reference WX1546.\u003c\/p\u003e\u003cp\u003eCompatible 15 mm pipes include blue cold water pipe with item no. 17.815.52 and red hot water pipe with item no. 17.815.54. For correct perpendicular cutting of semi-rigid pipes, the Whale pipe cutter WX7950 can be used.\u003c\/p\u003e\u003cstrong\u003e\u003cem\u003eKey features\u003c\/em\u003e\u003c\/strong\u003e\u003cp\u003eEnd stop for Whale Quick Connect 15 mm pipe system\u003cbr\u003eSeals the end of a 15 mm hot or cold water pipe\u003cbr\u003ePush-fit installation without soldering, glue, or special tools\u003cbr\u003eO-ring based seal with internal support ring\u003cbr\u003eMax. 12 bar at 20 °C\u003cbr\u003eMax. 6 bar at 65 °C\u003cbr\u003eCan be disassembled and reused\u003cbr\u003eManufacturer number WX1546B\u003c\/p\u003e","brand":"Whale","offers":[{"title":"Default Title","offer_id":57871394668926,"sku":"17.815.46","price":44.74,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/17.815.46_53eee92c-73b3-4fb9-8d99-f06c6d7fc314.jpg?v=1787195165"},{"product_id":"whale-quick-connect-15-mm-lige-slangestudsadapter-til-12-mm-slange-17-815-84","title":"Whale Quick Connect 15 mm straight stem adapter to 12 mm hose","description":"\u003cp\u003eThis \u003cstrong\u003estraight hose barb adapter\u003c\/strong\u003e from Whale connects a 15 mm Quick Connect female coupling to a flexible 12 mm hose. The adapter features a grooved 15 mm male stem at one end and a ribbed hose barb at the other.\u003c\/p\u003e\u003cp\u003eThe hose connection is nominally intended for ½\" flexible hose, which is designated as 12 mm in the metric variant. Its straight geometry makes the adapter suitable for installations where the hose must continue in the same direction as the Quick Connect fitting.\u003c\/p\u003e\u003cp\u003eThe adapter is made of glass-reinforced polypropylene and is part of the Whale Quick Connect 15 mm system for mobile water installations in boats, motorhomes, and caravans. Its solid construction provides a simple transition between the rigid pipe system and a flexible hose.\u003c\/p\u003e\u003cp\u003eThe male stem is pushed directly into a compatible Whale Quick Connect 15 mm female coupling. The assembly requires neither special tools nor separate locking clips and can be dismantled and reused. The gripping and O-ring mechanism is located in the corresponding female coupling, forming a watertight seal around the adapter's male stem.\u003c\/p\u003e\u003cp\u003eThe Quick Connect system is rated for a maximum pressure of 12 bar for cold water at 20 °C and 6 bar for hot water at 65 °C. The adapter has no thread and should therefore not be confused with the product family's BSP threaded adapters.\u003c\/p\u003e\u003cp\u003eThe manufacturer number is WX1584, while WX1584B is the current bulk-related code and replaces WX1584. The product is covered by a 10-year warranty.\u003c\/p\u003e\u003cstrong\u003e\u003cem\u003eKey features\u003c\/em\u003e\u003c\/strong\u003e\u003cp\u003eStraight hose barb adapter for mobile water systems\u003cbr\u003e15 mm Whale Quick Connect male stem\u003cbr\u003eHose barb for 12 mm, nominally ½\", flexible hose\u003cbr\u003eGlass-reinforced polypropylene\u003cbr\u003eTool-free push-fit installation into compatible female coupling\u003cbr\u003eMax. 12 bar at 20 °C\u003cbr\u003eMax. 6 bar at 65 °C\u003cbr\u003eThreadless\u003cbr\u003eDismountable and reusable\u003cbr\u003e10-year warranty\u003c\/p\u003e","brand":"Whale","offers":[{"title":"Default Title","offer_id":57871394701694,"sku":"17.815.84","price":18.33,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/17.815.84_8b48113a-164c-4ed9-8dc4-d84a3365e34b.jpg?v=1787195171"},{"product_id":"whale-quick-connect-15-mm-ligeloebende-t-stykke-17-815-02","title":"Whale Quick Connect 15 mm equal tee","description":"\u003cp\u003eThis \u003cstrong\u003eWhale Quick Connect 15 mm equal tee\u003c\/strong\u003e is a T-shaped push-fit pipe fitting for branching Whale Quick Connect and WhaleX water installations. All three connections have the same nominal size of 15 mm, allowing for a T-branch to be established without a change in dimensions.\u003c\/p\u003e\u003cp\u003eThe tee is manufactured from glass-reinforced polypropylene and features a one-piece fitting body. The double gripper design secures the pipe under high and fluctuating pressure, while an internal support ring keeps the O-ring seal in place. The integrated cage collet supports the pipe and reduces the risk of leakage near sharp pipe bends. An external cover around the locking ring prevents accidental release of the pipe.\u003c\/p\u003e\u003cp\u003eInstallation is carried out without special tools. The pipe is cut cleanly and squarely and then pushed into the fitting up to the second internal stop. To dismantle, the grey locking ring is pushed in while the pipe is pulled out. The connection can be dismantled and reassembled without spare parts, provided the pipe and fitting are undamaged. No separate safety clips, collet clips, or pipe inserts are required.\u003c\/p\u003e\u003cp\u003eThe fitting is designed for Whale's 15 mm semi-rigid plastic pipe and compatible grooved Whale spigots in mobile and marine water installations. It can be used for both cold and hot water within the system's operating limits: up to 12 bar at 20 °C and up to 6 bar at 65 °C.\u003c\/p\u003e\u003cp\u003eThe manufacturer numbers are WX1502B for bulk\/OEM packaging and WX1502 for retail packaging; the actual function and connection size of the fitting are the same. The Whale WX7950 pipe cutter can be used to produce the clean, square pipe cut required for installation. Quick Connect fittings come with a 10-year manufacturer's warranty in accordance with the applicable warranty terms.\u003c\/p\u003e\u003cstrong\u003e\u003cem\u003eKey features\u003c\/em\u003e\u003c\/strong\u003e\u003cp\u003eEqual tee with three identical connections\u003cbr\u003e3 × 15 mm Whale Quick Connect push-fit pipe connection\u003cbr\u003eFor Whale Quick Connect and WhaleX pipe systems\u003cbr\u003eGlass-reinforced polypropylene\u003cbr\u003eTool-free connection and disconnection\u003cbr\u003eReusable connection without separate clips or pipe inserts\u003cbr\u003eMax. 12 bar at 20 °C\u003cbr\u003eMax. 6 bar at 65 °C\u003cbr\u003eManufacturer number: WX1502B \/ WX1502\u003cbr\u003e10-year manufacturer's warranty in accordance with warranty terms\u003c\/p\u003e","brand":"Whale","offers":[{"title":"Default Title","offer_id":57871394767230,"sku":"17.815.02","price":64.22,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/17.815.02_e7da6900-2a3d-47a3-8e7c-dd17052cf2d6.jpg?v=1787195174"},{"product_id":"whale-quick-connect-15-mm-messing-blindprop-17-815-08","title":"Whale Quick Connect 15 mm brass blanking plug","description":"\u003cp\u003eThis \u003cstrong\u003eWhale Quick Connect 15 mm brass blanking plug\u003c\/strong\u003e is used to close an unused connection in the Whale Quick Connect plumbing system. The plug is inserted internally into a compatible 15 mm fitting and is suitable for water installations on board boats and in other mobile installations.\u003c\/p\u003e\u003cp\u003eThe blanking plug is made of lead-free brass, which is suitable for drinking water. It can be used for both cold and hot domestic water within the documented pressure and temperature limits of the Quick Connect system.\u003c\/p\u003e\u003cp\u003eInstallation is performed as a push-fit connection without soldering, glue, or special tools. Furthermore, the Quick Connect connection can be disconnected without special tools, allowing the components to be reused during modifications or servicing of the installation.\u003c\/p\u003e\u003cp\u003eIn the compatible fitting, the component is secured by the Quick Connect system's Double Gripper design. An internal support ring holds the O-ring in place, while the outer sleeve protects against accidental release. The system does not require extra locking clips or pipe inserts.\u003c\/p\u003e\u003cp\u003eThe maximum working pressure for the system is 12 bar at 20 °C and 6 bar at 65 °C. The maximum documented water temperature is 65 °C at a maximum of 6 bar. The Quick Connect plumbing system has a 10-year warranty.\u003c\/p\u003e\u003cp\u003eThe manufacturer part number for the bulk variant is WX1508B. WX1508 denotes the corresponding retail-packaged variant.\u003c\/p\u003e\u003cstrong\u003e\u003cem\u003eKey features\u003c\/em\u003e\u003c\/strong\u003e\u003cp\u003eBlanking plug for Whale Quick Connect 15 mm\u003cbr\u003eCloses an unused Quick Connect connection\u003cbr\u003eMade of lead-free brass\u003cbr\u003eSuitable for drinking water as well as cold and hot domestic water\u003cbr\u003ePush-fit installation without soldering or glue\u003cbr\u003eCan be disconnected and reused without special tools\u003cbr\u003eMax. 12 bar at 20 °C\u003cbr\u003eMax. 6 bar at 65 °C\u003cbr\u003eManufacturer no. WX1508B\u003c\/p\u003e","brand":"Whale","offers":[{"title":"Default Title","offer_id":57871394799998,"sku":"17.815.08","price":136.98,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/17.815.08_7b428051-cc14-4853-b960-359075d3b1d1.jpg?v=1787195174"},{"product_id":"whale-quick-connect-15-mm-stiftvinkel-90-wx1522b-17-815-22","title":"Whale Quick Connect 15 mm stem elbow 90° WX1522B","description":"\u003cp\u003eThis \u003cstrong\u003eWhale Quick Connect 15 mm stem elbow 90°\u003c\/strong\u003e is a one-piece pipe system fitting for Whale Quick Connect\/WX15 water installations. It connects a 15 mm semi-rigid pipe with a compatible 15 mm female connection while changing the pipe direction by 90°.\u003c\/p\u003e\u003cp\u003eThe fitting features one 15 mm female push-fit connection and one 15 mm stem end. The Double Gripper design secures the pipe under pressure, while the stably positioned O-ring ensures a seal. Separate locking clips are not required.\u003c\/p\u003e\u003cp\u003eThe fitting is manufactured from glass-reinforced polypropylene and can be used in hot and cold water installations as well as saltwater systems. The maximum working pressure is 12 bar at 20 °C and 6 bar at 65 °C. The maximum documented water temperature is 65 °C.\u003c\/p\u003e\u003cp\u003eInstallation is carried out without special tools: the pipe is cut straight and clean and pushed in to the fitting's second internal stop. For removal, the release collar is pressed in towards the fitting while the pipe is pulled out. The fitting can be released and reused without replacement parts.\u003c\/p\u003e\u003cp\u003eThe component is suitable for Whale Quick Connect\/System 15 with 15 mm semi-rigid pipes and compatible 15 mm female ports. The manufacturer part numbers are WX1522B and WX1522. Supplied individually.\u003c\/p\u003e\u003cstrong\u003e\u003cem\u003eKey features\u003c\/em\u003e\u003c\/strong\u003e\u003cp\u003e90° stem elbow for 15 mm pipe system\u003cbr\u003eOne 15 mm female push-fit connection and one 15 mm stem end\u003cbr\u003eTool-free installation and removal\u003cbr\u003eDouble Gripper retention and stable O-ring\u003cbr\u003eGlass-reinforced polypropylene\u003cbr\u003eMax. 12 bar at 20 °C\u003cbr\u003eMax. 6 bar at 65 °C\u003cbr\u003eFor hot water, cold water, and saltwater systems\u003c\/p\u003e","brand":"Whale","offers":[{"title":"Default Title","offer_id":57871394832766,"sku":"17.815.22","price":41.66,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/17.815.22_a3064622-9e33-4a3a-8e64-67870321cb7f.jpg?v=1787195181"},{"product_id":"whale-quick-connect-15-mm-vinkelfitting-90-med-1-2-bsp-indvendigt-gevind-17-815-31","title":"Whale Quick Connect 15 mm 90° elbow fitting with 1\/2\" BSP female thread","description":"\u003cp\u003eThis \u003cstrong\u003eWhale Quick Connect 15 mm elbow fitting\u003c\/strong\u003e is a 90° adapter between a 15 mm Whale Quick Connect pipe and a component with a 1\/2\" BSP external thread. The elbow shape is suitable when piping needs to change direction in confined spaces in a freshwater system.\u003c\/p\u003e\u003cp\u003eThe Quick Connect fitting is installed without the need for special tools. The pipe is cut cleanly and perpendicularly and pushed fully into the fitting. The Double Gripper design secures the pipe, while an internal support ring keeps the O-ring in place. The cage collet design supports the pipe closely at the insertion point and reduces the risk of leakage at sharp pipe bends.\u003c\/p\u003e\u003cp\u003eThe external sleeve protects the collet from accidental release, and no separate locking clip is required. To disassemble, the grey collet is pushed towards the fitting while the pipe is pulled out. The fitting can be reused after proper release.\u003c\/p\u003e\u003cp\u003eThe fitting is manufactured from glass-reinforced polypropylene and brass. It is intended for cold and hot freshwater with a maximum working pressure of 12 bar at 20 °C for cold water and 6 bar at 65 °C for hot water. The system is developed for marine and mobile water installations, including installations in recreational vehicles.\u003c\/p\u003e\u003cp\u003eUsed with 15 mm Whale Quick Connect\/WhaleX semi-rigid pipe. Documented system products include blue cold water pipe with item no. 17.815.52, red hot water pipe with item no. 17.815.54, and pipe cutter WX7950. The manufacturer number for this elbow fitting is WX1531B; WX1531 appears as an alternative retail code.\u003c\/p\u003e\u003cstrong\u003e\u003cem\u003eKey features\u003c\/em\u003e\u003c\/strong\u003e\u003cp\u003e90° elbow fitting for freshwater systems\u003cbr\u003eAdapter from 15 mm Quick Connect pipe to 1\/2\" BSP external thread\u003cbr\u003eTool-free installation and removal\u003cbr\u003eDouble Gripper pipe retention\u003cbr\u003eInternal support ring for the O-ring\u003cbr\u003eProtected collet without separate locking clip\u003cbr\u003eMax. 12 bar at 20 °C for cold water\u003cbr\u003eMax. 6 bar at 65 °C for hot water\u003cbr\u003eManufactured from glass-reinforced polypropylene and brass\u003c\/p\u003e","brand":"Whale","offers":[{"title":"Default Title","offer_id":57871394898302,"sku":"17.815.31","price":230.23,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/17.815.31_c768ec03-5316-4f36-a7ae-01b58aaf81c3.jpg?v=1787195181"},{"product_id":"whale-quick-connect-adapter-15-mm-til-3-8-bsp-indvendigt-gevind-plast-17-815-39","title":"Whale Quick Connect adapter 15 mm to 3\/8\" BSP female thread, plastic","description":"\u003cp\u003e\u003cstrong\u003eWhale Quick Connect adapter\u003c\/strong\u003e is a straight plastic adapter for transitioning from 15 mm Whale Quick Connect pipe to a component with a 3\/8\" BSP male thread. It is designed for marine and mobile water installations where a compact, removable pipe connection is required.\u003c\/p\u003e\u003cp\u003eThe pipe side has a push-fit quick connector for pipe with a 15 mm outside diameter, while the threaded side has a 3\/8\" BSP female thread. The fitting is part of the Whale Quick Connect 15 mm system, also known as System 15, and must be used with compatible Whale plastic pipes and system components.\u003c\/p\u003e\u003cp\u003eThe connection uses an internal O-ring and Whale's Double Gripper design to seal and secure the pipe under pressure. The molded fitting body has an external protective sleeve over the collet, which reduces the risk of accidental release.\u003c\/p\u003e\u003cp\u003eInstallation does not require special tools or safety clips. The pipe is cut cleanly and squarely and pushed into the fitting up to the second internal stop. To disassemble, the gray collet is pushed in toward the fitting body while the pipe is pulled out. The connection can then be reinstalled. Whale pipe cutter WX7950 or WX7951 can be used to make a clean pipe cut.\u003c\/p\u003e\u003cp\u003eThe system is rated for a maximum working pressure of 12 bar at 20 °C and 6 bar at 65 °C. The adapter's plastic construction and tool-free installation make it suitable for installing, servicing, and modifying water systems where space is limited.\u003c\/p\u003e\u003cstrong\u003e\u003cem\u003eKey features\u003c\/em\u003e\u003c\/strong\u003e\u003cp\u003eStraight plastic transition adapter\u003cbr\u003ePush-fit connection for 15 mm pipe\u003cbr\u003e3\/8\" BSP female thread\u003cbr\u003eMax. working pressure: 12 bar at 20 °C\u003cbr\u003eMax. working pressure: 6 bar at 65 °C\u003cbr\u003eInstallation without special tools or safety clips\u003cbr\u003eCan be released and reinstalled\u003cbr\u003eDouble Gripper pipe retention with internal O-ring\u003c\/p\u003e","brand":"Whale","offers":[{"title":"Default Title","offer_id":57871394996606,"sku":"17.815.39","price":70.46,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/17.815.39_7dd53a90-8b3f-41fd-8a1f-0ad138a9e627.jpg?v=1787195192"},{"product_id":"whale-quick-connect-lige-adapter-15-mm-x-1-2-bsp-indvendigt-gevind-17-815-32","title":"Whale Quick Connect straight adapter 15 mm x 1\/2\" BSP female thread","description":"\u003cp\u003eThis \u003cstrong\u003eWhale Quick Connect adapter\u003c\/strong\u003e is a straight connector between a 15 mm Whale Quick Connect pipe and a component with a 1\/2\" BSP male thread. The adapter is intended for hot and cold water installations in marine and mobile applications.\u003c\/p\u003e\u003cp\u003eThe Quick Connect end is installed by pushing a clean, square-cut 15 mm Whale semi-rigid pipe into the fitting up to the second internal stop. The joint itself requires no pipe insert, separate locking clip, or special tools. The connection can be released by pushing in the grey collet while pulling the pipe out.\u003c\/p\u003e\u003cp\u003eThe fitting is manufactured from white, glass-reinforced polypropylene as a single-piece moulding. The Double Gripper design secures the pipe under pressure, while an internal support ring protects the O-ring from deformation. The protected collet supports the pipe and reduces the risk of accidental disconnection.\u003c\/p\u003e\u003cp\u003eThe system's maximum working pressure is 12 bar at 20 °C for cold water and 6 bar at 65 °C for hot water. The adapter can be used with the Whale Quick Connect system's blue cold water pipe and red hot water pipe within these pressure and temperature limits.\u003c\/p\u003e\u003cp\u003eThe manufacturer number is WX1532B, which also appears written as WX1532(B). The Whale pipe cutter WX7950 can be used to produce the required clean, square pipe cut before installation. The Quick Connect system is covered by a 10-year system warranty.\u003c\/p\u003e\u003cstrong\u003e\u003cem\u003eKey features\u003c\/em\u003e\u003c\/strong\u003e\u003cp\u003eStraight adapter for 15 mm Whale Quick Connect pipe\u003cbr\u003e1\/2\" BSP male thread\u003cbr\u003ePush-fit installation without pipe insert or locking clip\u003cbr\u003eConnection can be released and reconnected\u003cbr\u003eGlass-reinforced polypropylene\u003cbr\u003eDouble Gripper retention and protected collet\u003cbr\u003eMax. 12 bar at 20 °C\u003cbr\u003eMax. 6 bar at 65 °C\u003cbr\u003eManufacturer number: WX1532B\u003c\/p\u003e","brand":"Whale","offers":[{"title":"Default Title","offer_id":57871395127678,"sku":"17.815.32","price":44.74,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/17.815.32_7102a8eb-e626-4a6d-919d-3c0fa2b642b8.jpg?v=1787195194"},{"product_id":"whale-quick-connect-lige-adapter-til-15-mm-roersystem-1-2-bsp-hangevind-17-815-14","title":"Whale Quick Connect straight adapter for 15 mm pipe system, 1\/2″ BSP male thread","description":"\u003cp\u003eThis \u003cstrong\u003eWhale Quick Connect adapter\u003c\/strong\u003e is a straight transition fitting for connecting a 15 mm Whale Quick Connect pipe system to a component with a 1\/2″ BSP female connection. The adapter has an external BSP thread and manufacturer number WX1514B.\u003c\/p\u003e\u003cp\u003eThe push-fit side is installed by cutting the pipe cleanly and pushing it into the fitting. The assembly is tool-free, and the adapter can be detached and reused by pressing the collet in while pulling the pipe out. No separate safety clip is required.\u003c\/p\u003e\u003cp\u003eThe Quick Connect design features Double Gripper retention, a supporting collet, and an internal support ring around the O-ring seal. This ensures secure pipe retention and reduces the risk of leakage at high or varying pressures, as well as during installation close to a pipe bend. The integrated outer sleeve also protects against accidental release.\u003c\/p\u003e\u003cp\u003eThe adapter is made of white plastic and is intended for hot and cold water installations. The maximum system pressure is 12 bar at 20 °C and 6 bar at 65 °C.\u003c\/p\u003e\u003cp\u003eThe fitting is designed for the Whale Quick Connect 15 mm system and Whale semi-rigid 15 mm pipe. It can, for example, be used as a transition to pumps, valves, taps, and other components with 1\/2″ BSP female threads, provided the connection otherwise meets installation requirements.\u003c\/p\u003e\u003cp\u003eFor correct cutting of Whale pipes, the WX7950 pipe cutter can be used. Compatible system components include, among others, Whale semi-rigid pipe WX7168B as well as Quick Connect pipes WX7152B for cold water and WX7154B for hot water.\u003c\/p\u003e\u003cstrong\u003e\u003cem\u003eKey features\u003c\/em\u003e\u003c\/strong\u003e\u003cp\u003eStraight transition adapter for 15 mm pipe system\u003cbr\u003e1\/2″ BSP external thread\u003cbr\u003eTool-free Quick Connect push-fit assembly\u003cbr\u003eCan be detached and reused\u003cbr\u003eRequires no separate safety clip\u003cbr\u003eDouble Gripper, collet, and O-ring design\u003cbr\u003eMax. 12 bar at 20 °C\u003cbr\u003eMax. 6 bar at 65 °C\u003cbr\u003eWhite plastic\u003cbr\u003eManufacturer number WX1514B\u003c\/p\u003e","brand":"Whale","offers":[{"title":"Default Title","offer_id":57871395324286,"sku":"17.815.14","price":44.43,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/17.815.83_256491a4-8265-461c-a07b-46124f60d56b.jpg?v=1787195201"},{"product_id":"whale-quick-connect-lige-samlemuffe-15-mm-17-815-04","title":"Whale Quick Connect straight connector 15 mm","description":"\u003cp\u003eThis \u003cstrong\u003eWhale Quick Connect straight connector\u003c\/strong\u003e joins two 15 mm pipes in a straight line for hot and cold water installations. It is part of the Whale Quick Connect 15 mm system, also known as WX15, and is suitable for marine and other mobile water installations.\u003c\/p\u003e\u003cp\u003eThe two identical 15 mm Quick Connect ports use the push-fit principle. The pipes are pushed directly into the connector, allowing for installation and standard removal without special tools or the need for replacement parts. Separate safety clips are not required.\u003c\/p\u003e\u003cp\u003eThe one-piece molded construction is made of glass-reinforced polypropylene. The Whale Double Gripper design secures the pipes at high or fluctuating pressures, while the internally supported O-ring is held in place to prevent displacement and deformation under pressure. A depth mark on the pipe allows for verification of correct insertion depth.\u003c\/p\u003e\u003cp\u003eThe connector has a maximum working pressure of 12 bar at 20 °C and 6 bar at 65 °C. The pressure limit must therefore be adjusted based on the water temperature during operation.\u003c\/p\u003e\u003cp\u003eThe fitting is designed for Whale Quick Connect 15 mm semi-rigid pipe and compatible Whale grooved stems. It can be used with the blue 15 mm cold water pipe (item no. 17.815.52) and the red 15 mm hot water pipe (item no. 17.815.54). WX1504 is also documented as a direct connection part for the Whale V-Pump GP0650 when using the 15 mm pipe system.\u003c\/p\u003e\u003cp\u003eThe manufacturer numbers are WX1504 and WX1504B. For system installations, the Whale WX7950 pipe cutter and WX1565B pipe mounting clips are also available as related accessories.\u003c\/p\u003e\u003cstrong\u003e\u003cem\u003eKey features\u003c\/em\u003e\u003c\/strong\u003e\u003cp\u003eStraight connection between two 15 mm pipes\u003cbr\u003eTwo identical Whale Quick Connect ports\u003cbr\u003eTool-free push-fit installation\u003cbr\u003eNo separate safety clips required\u003cbr\u003eDouble Gripper retention and supported O-ring\u003cbr\u003eOne-piece molded construction in glass-reinforced polypropylene\u003cbr\u003eMax. working pressure: 12 bar at 20 °C\u003cbr\u003eMax. working pressure: 6 bar at 65 °C\u003cbr\u003eFor cold and hot water\u003c\/p\u003e","brand":"Whale","offers":[{"title":"Default Title","offer_id":57871395357054,"sku":"17.815.04","price":52.36,"currency_code":"DKK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/17.815.04_3cc6f386-772c-42de-9827-9a300fd4d3db.jpg?v=1787195204"},{"product_id":"whale-quick-connect-stamadapter-15-mm-til-1-2-bsp-udvendigt-gevind-17-815-87","title":"Whale Quick Connect stem adapter 15 mm to 1\/2\" BSP male thread","description":"\u003cp\u003eThis \u003cstrong\u003eWhale Quick Connect stem adapter\u003c\/strong\u003e creates a straight transition from a 15 mm Quick Connect female port to a 1\/2\" BSP male thread. The adapter is intended for marine water installations and can be used in cold water, hot water, and drinking water systems.\u003c\/p\u003e\u003cp\u003eThe Quick Connect stem is installed without special tools and requires neither separate pipe inserts nor locking clips. The outer sleeve protects the connection against accidental release, while the system's Double Gripper design secures the component under high pressure. The cage collet design also prevents leakage in installations close to sharp pipe bends.\u003c\/p\u003e\u003cp\u003eThe adapter is manufactured from plastic as a high-integrity one-piece molding. Marked insertion depths provide visual control of the installation. The Quick Connect system is developed for Whale pipes, and alternative pipe brands are not recommended as a direct replacement.\u003c\/p\u003e\u003cp\u003eThe system's combined pressure and temperature limits are up to 6 bar at 65 °C for hot water and up to 12 bar at 20 °C for cold water. The limits must be applied as related pressure\/temperature values.\u003c\/p\u003e\u003cp\u003eThe adapter can be used for Whale Watermaster and Universal freshwater pumps with a 15 mm Quick Connect port. Documented related pump numbers are 16.700.01, 16.700.02, 16.700.12, 16.700.13, and 16.700.15. The manufacturer number is WX1587, while WX1587B denotes the bulk\/OEM version.\u003c\/p\u003e\u003cstrong\u003e\u003cem\u003eKey features\u003c\/em\u003e\u003c\/strong\u003e\u003cp\u003eStraight stem adapter for marine water installations\u003cbr\u003e15 mm Whale Quick Connect stem\u003cbr\u003e1\/2\" BSP male thread\u003cbr\u003eTool-free Quick Connect installation\u003cbr\u003eRequires no separate pipe inserts or locking clips\u003cbr\u003eDouble Gripper and cage collet design\u003cbr\u003eOne-piece molded plastic construction\u003cbr\u003eFor cold water, hot water, and drinking water\u003cbr\u003eManufacturer number: WX1587\u003c\/p\u003e","brand":"Whale","offers":[{"title":"Default Title","offer_id":57871395422590,"sku":"17.815.87","price":15.25,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/17.815.87_d2cba6cb-eba7-46ce-bc8c-560092ee9e6a.jpg?v=1787195204"},{"product_id":"whale-quick-connect-stem-t-stykke-15-mm-17-815-21","title":"Whale Quick Connect stem tee 15 mm","description":"\u003cp\u003eThis \u003cstrong\u003eWhale Quick Connect stem tee 15 mm\u003c\/strong\u003e is a T-shaped push-fit pipe fitting for the Whale Quick Connect 15 mm piping system. The component has two female\/pipe connections for 15 mm pipes and one 15 mm male stem connector.\u003c\/p\u003e\u003cp\u003eThe stem can be inserted directly into another 15 mm Quick Connect fitting. Multiple fittings can thus be connected in series to form a compact manifold with outlets that can be oriented according to the installation's layout. The solution is intended for marine and other mobile water installations with cold or hot water.\u003c\/p\u003e\u003cp\u003eThe fitting body is molded in one piece from glass-reinforced polypropylene. The double gripper design secures the pipe, while an internal support ring holds the O-ring in place under pressure. A supporting collet reduces the risk of leaks near pipe bends, and the outer sleeve protects the release ring from accidental activation.\u003c\/p\u003e\u003cp\u003eThe Quick Connect fitting is installed without tools. The pipe is cut cleanly and squarely and pushed all the way into the fitting's second internal stop. To disassemble, the gray release ring is pressed in while the pipe is pulled out, allowing the component to be reused when changes are made to the piping system.\u003c\/p\u003e\u003cp\u003eThe system can be used at up to 12 bar and 20 °C with cold water or up to 6 bar and 65 °C with hot water. It is recommended to use Whale\/Whalex plastic pipes and grooved Whale stems. The installation must be completely drained of water before freezing conditions to avoid frost damage; dry storage is indicated down to -40 °C.\u003c\/p\u003e\u003cp\u003eThe manufacturer number for this variant is WX1521B. WX1521 designates the retail version of the same basic component. Quick Connect fittings are covered by a 10-year manufacturer's warranty from the date of purchase in accordance with the applicable warranty terms.\u003c\/p\u003e\u003cstrong\u003e\u003cem\u003eKey features\u003c\/em\u003e\u003c\/strong\u003e\u003cp\u003eStem tee for Whale Quick Connect 15 mm\u003cbr\u003e2 × 15 mm push-fit female connection\u003cbr\u003e1 × 15 mm male stem connector\u003cbr\u003eCan be assembled into a manifold\u003cbr\u003eTool-free and demountable push-fit installation\u003cbr\u003eGlass-reinforced polypropylene\u003cbr\u003eMax. 12 bar at 20 °C for cold water\u003cbr\u003eMax. 6 bar at 65 °C for hot water\u003cbr\u003eManufacturer number: WX1521B\u003c\/p\u003e","brand":"Whale","offers":[{"title":"Default Title","offer_id":57871395520894,"sku":"17.815.21","price":57.67,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/17.815.21_13a1bbc4-3aaa-4820-98e5-49f770a633aa.jpg?v=1787195210"},{"product_id":"whale-wx1552b-lige-quick-connect-adapter-15-mm-med-3-4-hungevind-17-815-40","title":"Whale WX1552B straight quick-connect adapter 15 mm with 3\/4\" female thread","description":"\u003cp\u003eThis \u003cstrong\u003estraight quick-connect adapter\u003c\/strong\u003e from Whale connects a 15 mm quick-connect pipe to a 3\/4\" male connection. WX1552B is part of the Whale Quick Connect Plumbing system and can be used in marine fresh water installations where a compact, straight transition between pipe and threaded connection is required.\u003c\/p\u003e\u003cp\u003eThe quick-connect end is designed with a double gripper, a pipe-supporting collet, and an internal support ring that holds the O-ring seal under pressure. The fitting body is molded in one piece from glass-reinforced polypropylene, while the outer sleeve protects the collet against accidental release. No separate locking clip is required.\u003c\/p\u003e\u003cp\u003eThe pipe is installed by cutting it with a straight, clean cut and pushing it into the fitting's second internal stop. To disassemble, press the grey collet in while pulling the pipe out. The joint can thus be reopened without replacing any parts of the fitting. The Whale pipe cutter WX7950 is the proven tool for cutting Whale semi-rigid pipe.\u003c\/p\u003e\u003cp\u003eThe system is intended for 15 mm pipes with an outer diameter of 15 mm. The maximum system pressure is 12 bar at 20 °C and 6 bar at 65 °C. The minimum temperature for dry storage is -40 °C. The water system must be drained and winterized when there is a risk of frost.\u003c\/p\u003e\u003cp\u003eThe threaded connection is designated as both 3\/4\" BSP female thread and 3\/4\" Garden Hose Thread, female. The two designations should not be equated without checking, so the thread standard of the mating part must be verified before installation. The adapter is documented for New Edge and Classic EVO pressure reducing valves as well as Whale Universal fresh water pumps with 3\/4\" male thread, including item nos. 16.700.04 and 16.700.05.\u003c\/p\u003e\u003cstrong\u003e\u003cem\u003eKey features\u003c\/em\u003e\u003c\/strong\u003e\u003cp\u003eStraight transition from 15 mm quick-connect pipe to 3\/4\" female thread\u003cbr\u003eWhale Quick Connect Plumbing series, model WX1552B\u003cbr\u003eDouble gripper and supported O-ring seal\u003cbr\u003eFitting body molded in one piece\u003cbr\u003eGlass-reinforced polypropylene\u003cbr\u003eInstallation without separate locking clip or special tools\u003cbr\u003eCan be disassembled without replacing parts\u003cbr\u003eMax. system pressure: 12 bar at 20 °C and 6 bar at 65 °C\u003cbr\u003eGreen version\u003c\/p\u003e","brand":"Whale","offers":[{"title":"Default Title","offer_id":57871395553662,"sku":"17.815.40","price":72.92,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/17.815.40_cbedb954-8896-437d-b337-21f46ed4ddf7.jpg?v=1787195215"},{"product_id":"lige-tankgennemfoering-med-slangestuds-til-fleksibel-vandtank-udloeb-oe16-mm-52-196-90","title":"Straight through-hull fitting with hose barb for flexible water tank – outlet, Ø16 mm","description":"\u003cp\u003e\u003cstrong\u003eStraight tank fitting with hose barb for flexible water tank\u003c\/strong\u003e is a replacement outlet made of nylon with a straight design and Ø16 mm hose barb. It is used to lead water from a compatible flexible water tank to a 16 mm hose.\u003c\/p\u003e\u003cp\u003eThe fitting is installed through the tank wall. The construction consists of a fitting with an internal flange, an external ring at the tank wall, and fastening with a nut. The mounting principle secures the fitting on both sides of the flexible tank wall. It is not documented which loose mounting parts are included with the spare part.\u003c\/p\u003e\u003cp\u003eThe outlet must be placed as low as practically possible on the tank. The internal ring can be used to mark the hole, after which the tank wall is folded and the hole is cut. The flange is placed on the inside, while the ring is placed on the outside with the edge against the tank wall before the assembly is tightened with the nut. In case of inclined tank mounting, the tank's vent must be placed at the highest point.\u003c\/p\u003e\u003ch3\u003eCompatible water tanks\u003c\/h3\u003e\u003cp\u003eThe spare part fits the flexible water tanks 52.196.01 (55 l, rectangular, 69 × 72 cm), 52.196.03 (150 l, rectangular, 69 × 136 cm), 52.196.05 (55 l, triangular, 107 × 94 cm) and 52.196.06 (100 l, triangular, 131 × 102 cm). The listed dimensions and capacities describe the compatible tanks and not the fitting itself.\u003c\/p\u003e\u003ch3\u003eRelated versions\u003c\/h3\u003e\u003cp\u003eItem no. 52.196.91 is a related 90° outlet with Ø16 mm hose barb. Item no. 52.196.92 is a straight filling\/inlet fitting with Ø37 mm hose barb, while 52.196.93 is a 90° version with Ø38 mm hose barb.\u003c\/p\u003e\u003cstrong\u003e\u003cem\u003eKey features\u003c\/em\u003e\u003c\/strong\u003e\u003cp\u003eReplacement outlet for flexible water tank\u003cbr\u003eStraight tank fitting\u003cbr\u003eØ16 mm hose barb\u003cbr\u003eMade of nylon\u003cbr\u003eInstalled through the flexible tank wall\u003cbr\u003eCompatible with water tanks 52.196.01, 52.196.03, 52.196.05 and 52.196.06\u003c\/p\u003e","brand":"Osculati","offers":[{"title":"Default Title","offer_id":57917435249022,"sku":"52.196.90","price":61.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/EN_52.196.90-92.jpg?v=1787753879"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/collections\/Skroggennemforing_mv.png?v=1790001085","url":"https:\/\/alpina-marineudstyr.dk\/en\/collections\/sovandsindtag-skroggennemforinger-kugleventiler-og-fittings-til-baden.oembed?page=6","provider":"Alpina Marineudstyr","version":"1.0","type":"link"}