{"product_id":"bw26-isotemp-basic-marinevandvarmer-40-l","title":"Isotemp Basic marine water heater 40 l","description":"\u003cp\u003eThis \u003cstrong\u003eIsotemp marine water heater with electric heating element and engine heat exchanger\u003c\/strong\u003e in the Basic 40 version provides hot water for boats and yachts. The tank has a capacity of 40 l and can be heated either electrically with a 750 W heating element at 220 V or via a heat exchanger connected to the cooling circuit of a freshwater-cooled engine.\u003c\/p\u003e\u003cp\u003eThe inner tank, heat exchanger coil, and water connections are made of AISI 316 stainless steel. The brushed outer casing and mounting brackets are made of AISI 304 stainless steel, while polyurethane foam around the tank reduces heat loss. The product measures 640 × Ø395 mm and weighs 15.5 kg.\u003c\/p\u003e\u003cp\u003eThe electric heating element is made of nickel-plated copper and is placed at the bottom of the tank, where the water is coldest. The positioning counteracts temperature stratification and supports uniform heating. The operating thermostat is set to 75 °C, and the separate over-temperature protection triggers at 96 °C and is reset manually after triggering.\u003c\/p\u003e\u003cp\u003eThe water heater has a 7 bar safety and drain valve as well as a dual operating and safety thermostat. The recommended maximum pressure from the freshwater pump is 3.8 bar. The freshwater and engine water connections are ½\", and the engine hose should have an inner diameter of at least 16 mm. The cooling water flow through the heat exchanger must be at least 2 l\/min.\u003c\/p\u003e\u003cp\u003eThe Basic 40 can be mounted horizontally or vertically. The adjustable mounting feet allow the unit to be fastened to a suitable shelf or bulkhead, and the safety\/drain valve must always be positioned at the lowest point of the tank. Allow for approximately 30 cm of clear space in front of the unit for service, and dimension the mounting according to the weight of both the water heater and 40 l of water.\u003c\/p\u003e\u003cp\u003eThe tank is covered by a 5-year warranty against leakage. The safety valve has a drain function for winterization; the drain must be routed freely without a shut-off valve. During heating, a small amount of water may run from the valve as a result of water expansion.\u003c\/p\u003e\u003ch3\u003eSpare parts references\u003c\/h3\u003e\u003cp\u003eDocumented spare parts for the Basic 40 with a 7 bar safety valve include operating thermostat SEA00041LA \/ 09109, over-temperature thermostat SEA00042LA \/ 09108, 230 V\/750 W heating element SEE00019LA \/ 09103, gasket set SDF00025AA \/ 09118, and safety\/drain valve SFD00023AA \/ 09160. Check the product serial number before ordering spare parts.\u003c\/p\u003e\u003cstrong\u003e\u003cem\u003eImportant features\u003c\/em\u003e\u003c\/strong\u003e\u003cp\u003eCapacity: 40 l\u003cbr\u003eHeating: 750 W electric heating element or engine heat exchanger\u003cbr\u003eVolts: 220 V\u003cbr\u003eProduct dimensions: 640 × Ø395 mm\u003cbr\u003eInner tank and heat exchanger in AISI 316 stainless steel\u003cbr\u003ePolyurethane foam insulation\u003cbr\u003eMax. pressure: 7 bar\u003cbr\u003eHorizontal or vertical mounting\u003cbr\u003eDual operating and safety thermostat\u003cbr\u003e5-year tank warranty against leakage\u003c\/p\u003e","brand":"Indel - Isotemp","offers":[{"title":"Default Title","offer_id":68123474100615,"sku":"50.291.02.B","price":4999.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/0069\/5422\/files\/1280252_XL.jpg?v=1780803796","url":"https:\/\/alpina-marineudstyr.dk\/en\/products\/bw26-isotemp-basic-marinevandvarmer-40-l","provider":"Alpina Marineudstyr","version":"1.0","type":"link"}