This Pitot speedometer with a black dial and polished bezel is an analog marine instrument with a scale from 0 to 35 MPH and a secondary metric scale up to approximately 55 km/h. The instrument displays the boat's speed based on water pressure from a Pitot tube and therefore does not require GPS, an NMEA network, or an electric speed transducer.
The speedometer features a black dial, a clear convex anti-fog lens, and a polished AISI 316 stainless steel bezel. The instrument housing is made of technopolymer, and the construction has an IP67 protection rating. The analog dial can be illuminated with either red or yellow light, which is selected during installation. The illumination is powered by 12/24 V DC, while the speed measurement itself is water-pressure-based.
The front diameter of the instrument is 96 mm, and it is mounted in a round panel cutout of Ø85 mm. The instrument depth is 55 mm. It can be mounted in panels with a thickness of 0.5–20 mm and is secured from behind with a locking ring. There must be at least 85 mm of free space behind the panel for the instrument, connector, fitting, and pressure hose.
On the back, there is a connector with a bayonet lock as well as a fitting for the Pitot system's pressure hose. The blue wire is used for ground, while orange is selected for red illumination or yellow for yellow illumination. The selected illumination wire is connected to positive 12/24 V via an ignition switch or a separate switch; the switch is not included.
The speedometer is intended for a water-pressure-based Pitot system. The separate installation kit, item no. 27.325.00, consists of Pitot pickup 27.315.00 and 6 m of high-pressure PVC hose. The Pitot pickup is made of white nylon and is dimensioned for water-pressure speedometers with speeds up to 80 MPH.
Key featuresAnalog Pitot speedometer with a scale from 0 to 35 MPH
Water-pressure-based measurement via Pitot tube and pressure hose
Black dial and polished AISI 316 stainless steel bezel
Choice between red and yellow backlighting
12/24 V DC for instrument illumination
Front diameter 96 mm and panel cutout Ø85 mm
Instrument depth 55 mm and at least 85 mm installation space
For panel thickness 0.5–20 mm
Clear, convex anti-fog lens
IP67 protection rating