Vertical tank level sensor in AISI 316 stainless steel with S5 flange for measuring levels in fuel and water tanks. This S5-A variant has a nominal sensor and insertion length of 47 cm, a resistive output signal of 240–33 Ω, and can be used in 12 or 24 V electrical systems.
The sensor operates with an axially moving float that changes resistance in line with the liquid level. The signal is designed for level instruments that support the 240–33 Ω characteristic. The sensor is compatible with relevant instruments from manufacturers including Teleflex, Aqua Meter, Vetus, S. Giorgio Sein/Veglia, Beede, Medallion, and Datcom. A compatible fuel level instrument is item no. 27.160.00.
The vertical construction is made of AISI 316 stainless steel. The probe rod has an outer diameter of 12.7 mm, while the S5 flange measures Ø69 mm and has a bolt circle of Ø54 ±0.25 mm. The flange is 3 mm thick and has five Ø5.5 mm mounting holes. The connection cable is 460 ±20 mm long, and the assembly uses an NBR gasket.
The nominal L-dimension is 470 mm with a tolerance of ±2 mm. The sensor length should be chosen according to the internal depth of the tank so that the float can move correctly. When mounting on a tank without an existing flange, use a Ø40 mm center hole and five screw holes of Ø4.0–4.2 mm. Orient the sensor and gasket according to the cable direction, and tighten the five M5 screws evenly in a star pattern.
The sensor has an IP65 protection rating and a documented temperature range from −40 °C to +85 °C. The nominal power is 125 mW and the maximum operating current is 300 mA. The permitted deviation of the resistance output is ±(1 Ω + R × 1.5%).
When connecting to a Victron Cerbo GX or Ekrano GX, the sensor's resistive signal can be used with the built-in tank inputs without a separate GX Tank 140 interface. The system's tank input must be configured for the sensor's 240–33 Ω characteristic.
The sensor complies with the RoHS Directive (EU) 2015/863, which amends 2011/65/EU, as well as the EMC Directive 2014/30/EU. The specified EMC standards include EN 61326-1:2013 and EN 61000-6:2007 with EN 61000-6:2007/A1:2011/AC:2012.
Key featuresFor level indication in fuel and water tanks
47 cm nominal sensor/insertion length, L ±2 mm
Resistive output signal of 240–33 Ω
Universal compatibility with 12/24 V systems
AISI 316 stainless steel
S5 international 5-hole flange
IP65 and temperature range from −40 °C to +85 °C
460 ±20 mm connection cable
RoHS and EMC compliance