Jeg har VC 17m eller VC 17m Extra på min båd - hvad gør jeg?

Switch to VC Offshore: The Ultimate Guide to International's New Thin Film Antifouling

Are you tired of having to sand down your antifouling every year? Do you want an antifouling with minimal friction and maximum protection? Then it's time to switch to International VC Offshore !

VC Offshore is the latest generation of thin film antifouling paints from International, designed to give you a smoother bottom, better speed and less maintenance. But how do you switch from the older VC 17 variants to this new technology? Fear not, Alpina Marine Equipment will guide you through the process!

From VC 17, VC 17m or VC 17m Extra to VC Offshore:

The transition to VC Offshore is simple, even if you have previously used VC 17, VC 17m or VC 17m Extra. Just follow these steps:

  1. Cleaning: Wash thoroughly with fresh water and a suitable basic cleaner to remove dirt, salt and algae.
  2. Degreasing: Use International VC General Thinner to degrease the surface.
  3. Light sanding: Sand lightly with 240 grit sandpaper to ensure good adhesion.
  4. Application of VC Offshore: Apply 2-3 coats of VC Offshore with a roller or sprayer. Remember to follow the specified drying times between coats.

Note:

  • If your bottom is in poor condition or has many layers of old antifouling, it may be necessary to remove the old antifouling completely with Interstrip.
  • When overpainting VC 17m Extra, please be aware that it contains zinc pyrithione, which may affect the adhesion of VC Offshore. Please contact us for advice if you are in doubt.

How VC Offshore works:

VC Offshore is a thin film antifouling paint that creates an ultra-smooth surface that minimizes friction in the water. This gives you:

  • Increased speed: Less friction means less resistance and thus higher speed.
  • Reduced fuel consumption: A smoother bottom requires less energy to move through the water, saving you money on fuel.
  • Minimal maintenance: The thin film technology means that the bottom paint gradually wears off over the course of the season, eliminating the need to sand every year.

VC Offshore is the ideal solution for those who want:

  • A high-performance antifouling paint.
  • A smoother bottom and increased speed.
  • Less maintenance and hassle.

Visit our webshop to buy International VC Offshore and all the other equipment you need to maintain your boat. If you have any questions, you are always welcome to contact us for professional advice.

Happy sailing!

Alpina Marine Equipment

Bundmaling