This 50 W windshield wiper motor for wiper arm and wiper blade is a professional 12 V DC motor for windshield wiper systems in boats and other marine installations. The motor is dimensioned for a wiper arm of max. 800 mm and a wiper blade of max. 700 mm.
The motor has 2 speeds with catalogued rotation speeds of 35/45 rpm. The working torque is 7 Nm, while the maximum torque is 24 Nm. The standard wiping angle is 75°, and the automatic parking function returns the wiper to the zero position. The parking direction is left in the documented standard configuration.
The mounting shaft has a length of 60 mm. The motor has 2 × M20 × 1.5 mounting threads, an M8 thread on the output shaft end, and a shaft taper of 1:3. The output shaft is Ø12 mm and made of stainless steel, while the shaft housing/bushing is made of brass.
The total length of the motor is approx. 178 mm. The gear housing measures approx. 175 mm in outer width and approx. 96 mm in outer height, while the distance from the rear motor part to the front of the gear housing is 111 mm. The center distance between the shafts is 60 mm, the motor housing is approx. Ø70 mm, and the round gear part is approx. Ø50 mm.
The electrical connection is performed via a DIN connection and a five-wire system. The red wire is positive supply, black is negative/ground, green controls low speed, blue controls high speed, and yellow is used for the parking function. At a test voltage of 13.5 V, the no-load current is at most 2.5 A at low speed and at most 3 A at high speed. The circuit has thermal protection at 85 °C, and the noise level is at most 50 dB(A).
Wiper arm and wiper blade are not included and are ordered separately. The telescopic pantograph arm 19.190.01 of 650-800 mm as well as the wiper blades 19.194.01 of 600 mm and 19.194.02 of 700 mm are documented for the motor family. The standard variant is delivered with a 75° wiping angle; alternative configurations from 60° to 95° can be supplied upon request.
Key features12 V DC and 50 W
2 speeds: 35/45 rpm
Working torque: 7 Nm
Max. torque: 24 Nm
Standard wiping angle: 75°
Automatic parking in zero position
For wiper arm max. 800 mm and wiper blade max. 700 mm
DIN connection with five-wire system
Mounting shaft: 60 mm
Max. noise level: 50 dB(A)