Analog voltmeter for panel mounting and monitoring of the voltage in the boat's 12 V electrical system. The instrument has a measuring scale of 8–16 V, a black dial, and a polished front bezel.
The dial can be backlit with either red or yellow light. The yellow wire activates yellow illumination, while the orange wire activates red illumination. The red wire is used for positive supply, and the blue wire is connected to ground/negative. The voltmeter requires no separate sensor wire or external sensor.
The instrument has an IP67 rating, a technopolymer housing, and a front bezel made of AISI 316 stainless steel. The clear, convex lens is anti-fog treated so that the scale remains easy to read in humid maritime conditions. The connection on the back is prepared for a bayonet connector.
The outer diameter of the front is 57 mm, and the instrument depth is 45 mm. The product table indicates a catalog hole diameter of 51 mm, while the installation instructions specify a panel cutout of Ø52 mm. There must be at least 55 mm of free space behind the panel, and the instrument can be mounted in panels with a thickness of 0.5–20 mm.
For mounting, remove the rear fastening ring, then insert the instrument from the front of the panel and secure it from the back. The instrument housing's alignment tab is used to position the instrument correctly before connecting the wiring harness to the port on the back.
Key featuresAnalog voltage display with a scale from 8–16 V
For 12 V electrical systems
Choice between red and yellow backlighting
Black dial with polished front bezel
IP67 rating
Anti-fog treated, convex, and clear lens
Outer diameter: 57 mm
Specified panel cutout: Ø52 mm
Minimum free depth behind panel: 55 mm
Mounting in panel thickness of 0.5–20 mm