Ankerplex Original detachable stainless steel anchor AP5ST, 5.1 kg

Mærke: Ankerplex SKU: 01.160.05

Price:
Sale price2.384,00 kr

Description

This Ankerplex Original stainless steel take-apart anchor is model AP5ST with a product weight of 5.1 kg. This high-performance marine anchor can be used as a primary anchor, kedge anchor, reserve anchor, or emergency anchor and is designed for space-saving storage on board.

The anchor consists of three separate, flat parts: shank, penetration plate, and a transverse positioning plate. The parts are assembled manually without tools and secured with the included Ø6 mm assembly shackle. The design has no hinges or other moving parts that can jam during use, and the parts are manufactured without welding or bending.

The AP5ST is made of electropolished AISI 304 stainless steel. The assembled anchor measures 595 mm in length, 291 mm in width, and 301 mm in height. The primary anchor elements have a thickness of 8 mm, the positioning plate has a thickness of 4 mm, and the specified anchor area is 429 cm². The design is classified as High Holding Power (HHP) and is developed for quick setting and for re-establishing grip when the direction of pull changes.

The recommended boat size for the AP5ST is about 5.5 m under general conditions and about 6.5 m in good weather. Sizing also depends on the boat's displacement, windage, bottom conditions, weather, and local requirements. Sandy bottoms should be preferred, while rocky bottoms, vegetation, and soft mud should be avoided.

The anchor has two connection holes for the anchor line. The lower hole is used for general anchoring, while the upper hole can be used on soft sand or mud and increases the penetration angle by approximately 4°. The anchor line should be laid out in a ratio of at least 1:5 relative to the vertical distance from the boat's line outlet to the seabed. In strong wind or current, the ratio can be increased to approximately 1:10. When using anchor rope, a chain length at the anchor of at least the same length as the boat is recommended.

Shackles, chain, and other parts of the anchor gear should be checked regularly. After occasional use, the anchor should be rinsed with fresh water, dried, and stored in a dry and easily accessible place. The use of gloves is recommended during assembly, as the precision-cut parts may have sharp edges. The separate storage and transport bag with item no. 01.163.02 fits the models AP5 and AP8. The anchor is manufactured in Spain and comes with a 5-year warranty against defects in materials or the original manufacturing process.

Key features

Take-apart HHP marine anchor for primary, kedge, reserve, or emergency use
Three flat parts with tool-free assembly
No hinges or other moving parts
Electropolished AISI 304 stainless steel
Product dimensions: 595 × 291 × 301 mm
Product weight: 5.1 kg
Anchor area: 429 cm²
Included assembly shackle: Ø6 mm
Recommended boat size: approx. 5.5 m under general conditions
Matching storage bag: item no. 01.163.02

Did you know?

... that many of our products can be ordered online and picked up in our self-service stores?

See more here: Self-service stores

Did you know

... that many of our items can be ordered online and picked up in our self-service stores?

See more here: Self-service stores

Alpina Marineudstyr

Ask us about the product

Send us your question. The product will automatically be included in your message.

Ankerplex Original detachable stainless steel anchor AP5ST, 5.1 kg
Ankerplex Original detachable stainless steel anchor AP5ST, 5.1 kg Item no. 01.160.05

Description

Produkt: Demonterbart anker i rustfrit stål
Mærke: Ankerplex
Serie: Ankerplex Original
Model: AP5ST
Produkttype: Demonterbart anker
Anvendelse: Hovedanker, hjælpeanker, reserveanker eller nødanker
Længde: 595 mm
Bredde: 291 mm
Højde: 301 mm
Materiale: Elektropoleret AISI 304 rustfrit stål
Montering: Værktøjsfri samling med montagesjækel
Kompatibilitet: Vejledende bådlængde ca. 5,5 m under generelle forhold og ca. 6,5 m i godt vejr
Vægt: 5,1 kg
Tykkelse D: 8 mm
Tykkelse E: 4 mm
Ankerareal: 429 cm²
Montagesjækel: Ø6 mm
Antal hoveddele: 3
Tilslutningshuller: 2
Konstruktion: Uden svejsning, bukning, hængsler eller bevægelige dele
Ydelsesklasse: High Holding Power (HHP)
Ankerlineforhold: Mindst 1:5, op til ca. 1:10 ved kraftig vind eller strøm
Oprindelsesland: Spanien (EU)
Garanti: 5 år
Patentansøgningsreference: PCT/ES2023/070416

Similar products

Recently viewed products