AUTOTERM air distribution kit for AIR 2D distributes the heated air from an AIR 2D air heater to three air outlets. The kit is intended for the installation of a branched air duct system and contains the components for the described air distribution.
The configuration consists of one open, non-closable air outlet and two adjustable and closable air outlets. The open outlet ensures that at least one air path remains free, while the two adjustable outlets allow for the airflow to be adapted at the other discharge points.
The air distribution is established with one Y-connector and 8 m of air ducting with a specified diameter of Ø 65 mm. No T-connectors are included. The 65 mm diameter specification is not defined as an inner or outer diameter and should therefore be considered the trade size of the ducting.
When installing the AIR 2D, the air duct system must start with a duct of at least Ø 60 mm. The first meter after the heater outlet must be routed as straight as possible, and sharp or 90° bends should not be placed in this section. The 65 mm diameter specification for the included ducting is a separate dimension and must not be confused with the installation requirement at the heater outlet itself.
The kit comprises the air distribution parts for the described installation. The AIR 2D air heater itself, as well as the fuel system, exhaust parts, power supply, and control panel, are not documented as part of the kit.
Key featuresFor AUTOTERM AIR 2D air heater
Distribution to 3 air outlets
1 open, non-closable air outlet
2 adjustable and closable air outlets
1 Y-connector
No T-connectors
8 m air ducting
Specified duct diameter: Ø 65 mm
