This Bennett solenoid valve for hydraulic trim tab systems is a 24 V spare part with a green wire for the starboard valve in a Bennett Hydraulic Power Unit. The valve belongs to the VP1135 series and is used where manufacturer part number VP1135G24V is specified.
The solenoid valve controls the flow of hydraulic fluid from the pump unit to the actuator on the starboard side. When the valve closes, it helps maintain the trim tab's selected position. The green wire identifies the starboard valve and distinguishes this variant from the port-side valve with the red wire in the same series.
The valve is screwed directly into the valve body on the hydraulic pump unit, and the wire is connected to the system's plug. Before replacement, the trim tabs must be fully retracted to relieve the pressure in the pump unit. When removing, disconnect the wire from the plug, after which the valve can be unscrewed from the pump housing.
During installation, the valve's plunger and spring must remain correctly positioned. The new valve should be tightened by hand and must not be overtightened. The variant is intended for hydraulic Bennett trim tab systems with a 24 V HPU and VP1135 valve, including the pump unit V351HPU2. The complete 24 V pump unit can also be found under item no. 51.238.24.
The manufacturer part number is VP1135G24V, which also appears written as VP1135G24. The alternative model code is BN-VP1135-G/24, and the documented Yamaha OEM number is 6BT-50079-56-00. Check voltage, wire color, system side, and existing spare part number before replacement.
Key featuresReplacement solenoid valve for hydraulic trim tab pump
24 V variant with green wire
For the starboard valve in the trim tab system
VP1135 series
Mounts directly into the HPU valve body
Manufacturer part number: VP1135G24V
Yamaha OEM no.: 6BT-50079-56-00
