This fuel gauge is an analog, panel-mounted marine instrument for displaying fuel level. This variant features a black dial, a polished bezel, and is intended for 12/24 V electrical installations.
The instrument operates with a resistive signal of 0–190 Ω and must be connected to a fuel level sender with a corresponding signal range. Always check the sender's resistance range before installation.
The dial can be backlit with either red or yellow light via separate wires. The yellow wire activates yellow backlighting, the orange wire activates red backlighting, the black wire connects to the level sender, the red wire to a positive supply, and the blue wire to ground/negative.
The instrument has an outer diameter of 57 mm and a catalog-specified depth of 45 mm. The catalog hole diameter is 51 mm, while the installation manual recommends a panel cutout of Ø52 mm. There must be at least 55 mm of free space behind the panel, and mounting supports a panel thickness of 0.5–20 mm.
The instrument is inserted from the front of the panel and secured with a fastening ring from the rear. An alignment tab on the instrument housing must be accounted for in the cutout. For 24 V operation, the wiring diagram shows a voltage-reducing circuit with 150 Ω and 2 kΩ resistors.
The fuel gauge complies with EMC Directive 2014/30/EU as well as standards EN 55022:2010 + AC:2011, EN 55024:2010, EN 61000-3-2:2006 + A1:2009 + A2:2009, and EN 61000-3-3:2013.
Key featuresAnalog fuel level display
Signal range: 0–190 Ω
12/24 V operation
Optional red or yellow backlighting
Black dial and polished bezel
Outer diameter: 57 mm
Recommended panel cutout: Ø52 mm
Catalog depth: 45 mm
Panel mounting with fastening ring
EMC compliance per EU Directive 2014/30/EU