Analog fuel level gauge with white dial and polished bezel is an electric indicator instrument for monitoring fuel levels from the dashboard. The gauge operates with a resistive 0-190 Ω signal and can be powered by 12 or 24 V DC.
The instrument features an analog display, a white dial, and a polished AISI 316 stainless steel bezel. The convex, clear lens is anti-fog treated, while the IP67 protection class protects the instrument against dust and temporary immersion in water. The instrument housing is made of technopolymer.
The backlight can be connected for either red or yellow light. The yellow wire activates yellow lighting, while the orange wire activates red lighting. The red wire is used for positive power, the blue for ground/negative, and the black for the fuel sender. The connection on the back of the instrument is pre-configured with a bayonet connector.
The outer diameter of the instrument is 57 mm, and the depth is 45 mm. The nominal mounting diameter is 51 mm, while the panel should be cut to Ø52 mm for necessary clearance. Mounting can be performed in panels with a thickness of 0.5-20 mm, and there must be at least 55 mm of free space behind the panel.
The gauge is inserted through the panel from the front and secured with a fastening ring from the back. The instrument housing's positioning tab must be taken into account during marking and assembly. When installing on 24 V, the specified voltage-reducing resistors of 150 Ω and 2 kΩ must be used as shown in the installation diagram.
The gauge must be combined with a resistive fuel level sender with a signal range of 0-190 Ω. Tank depth, sender type, and flange connection must be selected separately according to the specific tank installation.
Key featuresAnalog fuel level display
Signal range: 0-190 Ω
Supply: 12/24 V DC
White dial and polished AISI 316 bezel
Choice between red and yellow backlight
Convex, clear and anti-fog treated lens
Protection class: IP67
Outer diameter: 57 mm
Panel cutout: Ø52 mm
Panel mounting with fastening ring