Isotemp Basic marine water heater 40 l

Save 4%
Mærke: Indel - Isotemp SKU: 50.291.02.B

Price:
Sale price4.999,00 kr Regular price5.229,00 kr

Description

This Isotemp marine water heater with electric heating element and engine heat exchanger in the Basic 40 version provides hot water for boats and yachts. The tank has a capacity of 40 l and can be heated either electrically with a 750 W heating element at 220 V or via a heat exchanger connected to the cooling circuit of a freshwater-cooled engine.

The inner tank, heat exchanger coil, and water connections are made of AISI 316 stainless steel. The brushed outer casing and mounting brackets are made of AISI 304 stainless steel, while polyurethane foam around the tank reduces heat loss. The product measures 640 × Ø395 mm and weighs 15.5 kg.

The electric heating element is made of nickel-plated copper and is placed at the bottom of the tank, where the water is coldest. The positioning counteracts temperature stratification and supports uniform heating. The operating thermostat is set to 75 °C, and the separate over-temperature protection triggers at 96 °C and is reset manually after triggering.

The water heater has a 7 bar safety and drain valve as well as a dual operating and safety thermostat. The recommended maximum pressure from the freshwater pump is 3.8 bar. The freshwater and engine water connections are ½", and the engine hose should have an inner diameter of at least 16 mm. The cooling water flow through the heat exchanger must be at least 2 l/min.

The Basic 40 can be mounted horizontally or vertically. The adjustable mounting feet allow the unit to be fastened to a suitable shelf or bulkhead, and the safety/drain valve must always be positioned at the lowest point of the tank. Allow for approximately 30 cm of clear space in front of the unit for service, and dimension the mounting according to the weight of both the water heater and 40 l of water.

The tank is covered by a 5-year warranty against leakage. The safety valve has a drain function for winterization; the drain must be routed freely without a shut-off valve. During heating, a small amount of water may run from the valve as a result of water expansion.

Spare parts references

Documented spare parts for the Basic 40 with a 7 bar safety valve include operating thermostat SEA00041LA / 09109, over-temperature thermostat SEA00042LA / 09108, 230 V/750 W heating element SEE00019LA / 09103, gasket set SDF00025AA / 09118, and safety/drain valve SFD00023AA / 09160. Check the product serial number before ordering spare parts.

Important features

Capacity: 40 l
Heating: 750 W electric heating element or engine heat exchanger
Volts: 220 V
Product dimensions: 640 × Ø395 mm
Inner tank and heat exchanger in AISI 316 stainless steel
Polyurethane foam insulation
Max. pressure: 7 bar
Horizontal or vertical mounting
Dual operating and safety thermostat
5-year tank warranty against leakage

Did you know?

... that many of our products can be ordered online and picked up in our self-service stores?

See more here: Self-service stores

Did you know

... that many of our items can be ordered online and picked up in our self-service stores?

See more here: Self-service stores

Alpina Marineudstyr

Ask us about the product

Send us your question. The product will automatically be included in your message.

Isotemp Basic marine water heater 40 l
Isotemp Basic marine water heater 40 l Item no. 50.291.02.B

Description

Produkt: Isotemp Basic marinevandvarmer 40 l
Mærke: Isotemp
Producent: Indel Marine S.r.l.
Serie: Basic
Model: Basic 40
Produkttype: Marinevandvarmer
Anvendelse: Varmtvandsforsyning på både og yachts
Volt: 220 V
Effekt: 750 W
Kapacitet: 40 l
Længde: 640 mm
Diameter: 395 mm
Materiale: AISI 316 rustfrit stål i tank, varmeveksler og vandtilslutninger; AISI 304 rustfrit stål i kappe og beslag
Maks. tryk: 7 bar
Temperatur: Driftstermostat 75 °C; overtemperaturbeskyttelse 96 °C
Gevind: ½" NPT/BSP afhængigt af tilslutningspunkt
Slangetilslutning: Motorkølevandsslange, min. 16 mm (5/8")
Montering: Vandret eller lodret med justerbare monteringsfødder
Kompatibilitet: Marineinstallation med ferskvandskølet motor
Vægt: 15,5 kg
Opvarmning: Elpatron og motorvarmeveksler
Varmelegeme: Nikkelbelagt kobber
Isolering: Polyurethanskum
Minimum kølevandsflow: 2 l/min
Anbefalet maks. pumpetryk: 3,8 bar
Sikkerhedsventil: 7 bar / 100 psi
Tankgaranti: 5 år mod lækage

Similar products

Recently viewed products