Cruiser shore power cable with boat connector is a pre-assembled 10 m cable for connection between the boat's Cruiser shore power inlet and a shore power pedestal on the quay. The cable assembly is rated for 10 A and is supplied with connectors at both ends.
At the boat end, the cable is fitted with a Cruiser connector for the 16 A series boat inlet. The connector's rotating locking ring secures the connection to the boat inlet and provides a tight IP67 connection when correctly connected. The cable is compatible with Cruiser boat inlets with item nos. 14.416.01, 14.416.11, 14.416.21, and 14.416.40. The boat inlet is not included.
The shore side is fitted with the three-pole 16 A male plug with item no. 14.335.01. The plug has IP44 protection, a housing made of UV-stabilized polycarbonate, and a cable entry with integrated cable stop and strain relief.
The cable has three conductors with a cross-section of 1.5 mm² per conductor, equivalent to 3 × 1.5 mm². The external cable diameter is 7.9 mm. The cable system is intended for European shore power installations around 220-230 V AC and complies with IEC 60309-5.
The cable assembly can be used as an independent power supply cable or together with a compatible Cruiser shore power system. Always check the boat inlet, shore connection, and power capacity before connecting.
Important featuresPre-assembled shore power cable for boat
10 m cable length and 10 A cable capacity
3 × 1.5 mm² conductor cross-section
External cable diameter of 7.9 mm
Cruiser boat connector with rotating locking ring
Included three-pole 16 A male plug for the shore side
IP44 protection on the shore-side plug
IP67 when the Cruiser connection is correctly joined
Standard: IEC 60309-5
