This electric marine toilet with a soft-close plastic seat is the Space Saver model for 12 V installations in boats. The compact design combines a white porcelain bowl with a white seat and lid, and the soft-close function ensures controlled closing of the seat.
The toilet features a self-priming bronze pump with a neoprene impeller, a permanent magnet motor, and a stainless steel motor shaft. The built-in macerator grinds the waste before discharge. Flushing and pumping are activated by a push-button via the included electrical control panel.
The Spray Nozzle flush connection distributes flush water under high pressure over the surface of the toilet bowl for quick and efficient cleaning. The water inlet is designed for a 19 mm (3/4") hose, while the discharge connects to a 25 mm (1") hose.
The Space Saver model measures 340 mm in height, 345 mm in width, and 420 mm in depth. The product weight is 14 kg. The toilet is secured through four mounting holes at the base of the macerator and can be installed both above and below the waterline.
For installations below the waterline, both the flush and discharge hoses must be routed in a loop approximately 20 cm above the waterline, taking into account the boat's heel and trim. A check valve is recommended near the tank or the hull fitting. The hoses must be installed without air leaks, restrictions, or sharp kinks.
The electrical installation must be carried out as a separate circuit. The battery's positive connection is routed through a correctly sized fuse located near the battery and then through the control panel to the motor. Correct polarity must be observed.
Compatible spare parts
Documented spare parts include base kit 50.209.82, complete 12 V pump kit 50.209.62, gasket and impeller kit 50.207.23, Space Saver porcelain bowl 50.207.37, and soft-close plastic seat 50.207.51. The included control panel is also available separately as item no. 50.204.44.
Key featuresSpace Saver model for 12 V
Power consumption of 15 A
White porcelain bowl with soft-close plastic seat
Self-priming bronze pump with neoprene impeller
Permanent magnet motor with stainless steel shaft
Built-in macerator
Spray Nozzle flush over the bowl surface
19 mm water inlet and 25 mm discharge
Control panel included
Can be installed above or below the waterline
