This FLAT low-profile push-button switch is a round, panel-mounted ON-OFF switch for 12 or 24 V DC electrical systems. The switch is latching, has a maximum rated current capacity of 20 A, and is equipped with an integrated RBW LED ring that can illuminate in red, blue, or white.
The housing is CNC-machined from AISI 316 stainless steel and features a black PVD finish. The anti-vandal construction and IP67 ingress protection rating make the switch suitable for exposed control panels where a compact switch with a protected front is required.
The LED ring has separate connections for red, blue, and white illumination. The installation can be configured so that the LED ring turns on along with the connected load, or so that it stays illuminated independently of the switch position. Electrical connection is made via rear-facing switch terminals and separate LED terminals.
The switch is mounted through a round panel hole and secured from the back with a threaded housing and nut. The external front diameter is Ø21.8 mm, the visible push surface is Ø13 mm, and the threaded housing diameter is Ø15.67 mm. The front protrudes 1.8 mm, the threaded section is 11.8 mm long, and the spade terminals measure 4.8 × 0.5 mm.
The switch can be connected directly to the terminals or used with the prefabricated connector 14.315.20 with 15 cm cables, a jumper for switch-controlled or constant LED light, and a locking ring. Connectors 14.315.31, 14.315.32, 14.315.33, and 14.315.34 add an automatic reset circuit breaker of 5, 10, 15, or 20 A, respectively.
Key featuresLatching ON-OFF switch
For 12/24 V DC systems
Maximum rated current capacity: 20 A
Integrated RBW LED ring with red, blue, and white light
CNC-machined AISI 316 stainless steel housing
Black PVD finish
Anti-vandal design
IP67 ingress protection rating
Panel mounting with threaded housing and nut
External front diameter: Ø21.8 mm
