This pump impeller Ref. 107 is a flexible replacement impeller with profile 26 for water, cooling water, and seawater pumps on inboard engines, generator sets, and other marine installations. The impeller has 12 blades and is supplied in a GT version with gasket and cover/plug.
The impeller is made of black neoprene and has an outer diameter of 57 mm and a width of 31.6 mm. The splined hub has an inner/outer reference measurement of 14.29 / 16 mm. When replacing, the diameter, width, hub dimensions, number of blades, and drive profile must correspond to the existing impeller.
The spare part cross-references to, among others, Jabsco 1210-0001 / 3085-0001 and Johnson Pump 09-1027B. Additionally, there are documented OEM and cross-references from, among others, Volvo Penta, Yanmar, Onan, Perkins, AIFO, Westerbeke/Universal, Yamaha/Sole, Ancor, Northern Lights, and Vetus. When replacing, both the impeller's dimensions, hub profile, and existing spare part number should be checked, as the engine make alone is not always sufficient to identify the correct impeller.
Documented cross-references include Jabsco 1210-0001 and 3085-0001, Johnson Pump 09-1027B, Volvo Penta 3862281, 875811-2, 877400, 21951346, 3858256, 3862567, 3855546, 3856039, 21951348, 860203, 3856039-7 and 925940, Yanmar 129470-42530, 129470-42532, 129670-42531 and 127610-42270, AIFO 4913429, Onan 132-0162 and 08-21-1201, Perkins 0460038 and 24880190, Westerbeke/Universal 302571, Yamaha/Sole 351.11.008, Ancor 50007 and J050007, Northern Lights 25-12060, Vetus IMP00201 as well as CEF 500107.
The many Volvo Penta and Yanmar references mean that the impeller appears in several different engine and pump installations. The specific raw water pump may vary between engine versions and production years, and the spare part number of the pump or the existing impeller should therefore always be checked before ordering.
Suggested engine models:
Yanmar 3JH, 4JH
- 3JH3E
- 3JH4E
- 3JH5E
- 4JH110
- 4JH2E
- 4JH3
- 4JH3E
- 4JH3-DTE
- 4JH3-HTE
- 4JH3-TCE
- 4JH3-TE
- 4JH4E
- 4JH4-HTE
- 4JH4-TE
- 4JH45
- 4JH57
- 4JH80
Impeller puller item no. 16.191.01 is intended for pumps with connections up to 1" / 25 mm, while item no. 16.191.02 is intended for pumps with connections from 1" / 25 mm.
Important features
Pump impeller Ref. 107 for inboard engine pump and generator set
Outer diameter: 57 mm
Width: 31.6 mm
Hub dimensions, inner/outer: 14.29 / 16 mm
12 blades and profile number 26
Material: Black neoprene
Hub design: Splined hub
GT version with gasket and cover/plug
Cross-reference: Jabsco 1210-0001 / 3085-0001 and Johnson Pump 09-1027B
OEM references to, among others, Volvo Penta, Yanmar, Onan, Perkins, Westerbeke/Universal, Vetus, and Northern Lights
Orbitrade: ORB-15811 and ORB-8-24004
Always check pump, engine, or generator model, original part number, dimensions, hub design, and impeller profile before purchasing.
