This flexible solar panel is an ultra-thin 12 V panel with a maximum output of 45 Wp. The 1120 × 282 mm format makes the panel suitable for narrow mounting surfaces where a traditional rigid solar module might be difficult to place.
The panel uses 32 Mono PERC solar cells in a 2 × 16 configuration. The voltage at maximum power is 18.56 V, while the current at maximum power is 2.43 A. The open-circuit voltage is 21.12 V, the short-circuit current is 2.58 A, and the module efficiency is 14.25%. The individual solar cells have a stated efficiency of 23%.
The 2.5 mm thin sandwich construction consists of a plastic backing, solar cells, and a UV-resistant epoxy resin surface coating. This results in a lightweight and flexible panel with a net weight of 1.1 kg. The back is white, and the operating temperature ranges from −40 °C to +85 °C.
Mounting can be done with double-sided tape or by using the panel's four mounting holes. The panel is supplied with 1 meter of PV cable and MC4 connectors so that it can be connected to a suitable solar installation. A set of male and female MC4 connectors with item no. 12.034.09 can be used on the cable side of the installation.
The panel is intended for energy supply and battery charging via a correctly dimensioned solar charge controller in 12 V systems. The flat and flexible construction is relevant on boats as well as in campervans, vans, and caravans, provided the mounting surface and electrical system match the panel's data.
Key featuresMaximum power: 45 Wp
Nominal system rating: 12 V
Mono PERC technology with 32 cells
Product dimensions: 1120 × 282 × 2.5 mm
Ultra-thin and flexible sandwich construction
Plastic backing and UV-resistant epoxy surface
Mounting with double-sided tape or four mounting holes
1 m PV cable and MC4 connectors included
Operating temperature: −40 °C to +85 °C
Standards: IEC 61215 and IEC 61730