This full-bore ball valve in AISI 316 with female thread is a manual 2-way shut-off valve for pipe and fluid systems. This variant features 1 1/4" BSP female threads at both ends and can be connected to pipe fittings with matching male threads.
The valve has a two-piece 2PC construction and is operated with a quarter-turn handle between open and closed positions. The full bore provides a clear passage of 32 mm when the valve is open. Gaskets and thrust washers are made of PTFE, while the valve seat is specified as PTFE or reinforced PTFE.
The valve body is manufactured from AISI 316 stainless steel. The installation length is 95 mm with a tolerance of ±1.6 mm, the total height is 78 mm, and the horizontal overall dimension across the operating handle is 150 mm.
The ball valve is documented for use with hot water, steam, gasoline, fuel, oil, diesel, kerosene, and compressed air. The working pressure and temperature range are not specified for this variant and must therefore be aligned with the requirements of the specific system.
The design is prepared for potential mounting onto a bracket or support clamp. This allows for supporting the valve in installations where the piping should not solely bear the load from the valve and operating handle.
Key features2-way full-bore ball valve
1 1/4" BSP female thread at both ends
32 mm clear bore diameter
Two-piece 2PC valve body
Manual quarter-turn operation
AISI 316 stainless steel
Installation length: 95 mm ±1.6 mm
Total height: 78 mm
Total dimension across handle: 150 mm
Prepared for mounting on a bracket
