This Full Flush fuel tank vent in chrome-plated brass is an angled 90° model for venting fuel tanks in maritime installations. This variant has a Ø 16 mm hose barb and is intended for a vent hose with a 16 mm internal diameter.
The vent opening is located on the underside of the fitting. This provides a completely closed top and the discreet look that characterizes the Full Flush series. The angled construction directs the hose connection 90° below the mounting surface.
The fitting is made of chrome-plated brass and has a top diameter of Ø 40 mm. The vertical total dimension from the top to the bottom level of the hose barb is 89 mm. Mounting is carried out as flush mounting with a through-going 3/4″ threaded section below the top part.
The tank vent is constructed in accordance with the requirements of UNI EN ISO 21487. No specific fuel type is specified, and the installation should therefore be adapted to the tank's and the fuel system's other documented requirements.
Key featuresFull Flush design with closed top
Vent opening located on the underside
Angled 90° model
Hose barb: Ø 16 mm
For vent hose with 16 mm internal diameter
Chrome-plated brass
Top diameter: Ø 40 mm
Vertical total dimension: 89 mm
Flush mounting with 3/4″ threaded section
Constructed according to the requirements of UNI EN ISO 21487
