This 4-way adjustable antenna mount with cable feed-through from the Glomex Glomeasy Line is model RA135FME, designed for mounting compatible marine antennas on decks or bulkheads. The articulated construction allows the antenna to be raised, angled, or laid flat according to the installation requirements.
The antenna is adjusted via a four-way hinge mechanism and secured with a twist-grip handle. The mount features a 5/8"-24 thread for the antenna connection as well as an integrated, water-protected feed-through, allowing the coaxial cable to be routed through the mounting surface. No numerical IP rating is specified.
The structure is made of white, reinforced, and UV-resistant nylon. The product measures 100 mm in length, 60 mm in width, and 180 mm in height. The nylon construction is developed for marine installations and is part of the modular Glomeasy system.
The mount is installed using four Ø 5 mm holes. The longitudinal hole spacing is 85 mm, while the transverse hole spacing is 45.5 mm. For installation, mark the holes using the base as a template, feed the cable through the base, and secure the mount with suitable screws and an appropriate sealant or gasket.
The RA135FME is compatible with the Glomex antennas RA300, RA300FM, RA300AIS, RA300DAB, RA106SLSFME, and RA106GRPFME. For the RA300, the mount is intended for the configuration with a total antenna length of 1.2 m. The combination of RA300 and RA301 with a total length of 2.4 m must use the specifically designated stainless steel antenna mount and not this nylon model.
The Glomeasy system's compact FME connections allow pre-terminated coaxial cables to be routed without cutting or soldering during installation. Compatible system accessories include, among others, the RA352 adapter for connection to a VHF radio. Glomex 4.010.0093 is a related gasket for, among others, the RA135FME.
Key featuresFour-way adjustable hinge mechanism
Locking with twist-grip handle
Reinforced and UV-resistant white nylon
Integrated cable feed-through
5/8"-24 thread for antenna connection
Deck or bulkhead mounting
Four mounting holes of Ø 5 mm
Hole spacing of 85 × 45.5 mm
Compatible with selected Glomeasy antennas