This Glomex Glomeasy RG62 coaxial cable for AM/FM antennas is a 25 m long, pre-assembled antenna cable for connection between a compatible Glomeasy antenna and a radio or car radio. The cable is model RA360/25 and is intended for AM/FM reception.
The black RG62 coaxial cable has an impedance of 93 Ω and is designed as a low-loss cable. The nominal cable diameter is 6 mm, and the 25 m length allows for installations with longer cable runs between the antenna and radio receiver.
The cable is supplied with a factory-fitted FME connector on the antenna side and a Motorola/car radio plug on the radio side. The pre-terminated design makes installation possible without soldering, connector assembly, or special tools. The FME connection has a diameter of approximately 9 mm, and a through-hole of at least 9.5 mm is recommended.
The cable is compatible with Glomex Glomeasy FM/AM/FM antennas with an FME connection, including the RA300FM and RA1288FME. The antenna with item no. 29.128.04 is also a proven compatible Glomeasy AM/FM antenna with an FME connection and 93 Ω impedance.
The RA360/25 is intended as a signal connection for AM/FM reception and should not be confused with RG8X cables for VHF, AIS, or DAB. The optional Glomex RA140 cable gland can be used where a pre-fitted connector must be passed through the deck or another installation surface; the gland is not included.
Key features25 m pre-assembled RG62 coaxial cable
93 Ω impedance and low signal loss
Black cable with a nominal diameter of 6 mm
Factory-fitted FME connector on the antenna side
Factory-fitted Motorola/car radio plug on the radio side
Installation without soldering or connector assembly
Recommended minimum through-hole: 9.5 mm
For Glomex Glomeasy FM/AM/FM antennas