This RG8X coaxial cable for Glomex Glomeasy antennas is an 18 m long, white low-loss cable for marine VHF, AIS, and DAB installations. The cable has an impedance of 50 ohms and connects a compatible Glomeasy antenna to the relevant radio or receiver equipment.
The cable is pre-terminated with FME female connectors at both ends. The factory-fitted connectors make it possible to route and connect the cable without cutting it, soldering, or retrofitting connectors. The maximum diameter of the FME connector is 9 mm, and a through-hole of at least 9.5 mm is recommended when the mounted connector needs to be passed through bulkheads or decks.
The RG8X cable has a nominal outer diameter of 6.2 mm and is designed with low signal attenuation. When the Glomeasy system's cable and antenna connection are installed correctly, a waterproof system connection is achieved. No separate IP rating is specified for the cable itself.
The cable is compatible with Glomex Glomeasy antennas RA106SLSFME, RA106GRPFME, RA300, RA300AIS, and RA300DAB. It can also be used with antennas with item nos. 29.990.01, 29.990.02, and 29.990.03. To connect a VHF radio with a PL259 connection, terminal RA352, item no. 29.990.20, is used.
The system can be extended with RA357, item no. 29.990.23, for coupling two RG8X cables. Documented adapter options also include RA354 for N-male, RA355 for BNC-male, and RA356 for TNC-male. For cable routing, the RA140 cable gland, item no. 29.140.00, can be used, while item no. 29.138.00 protects the connector.
Key features18 m RG8X low-loss coaxial cable
50 ohm impedance for VHF, AIS, and DAB
Pre-terminated with FME female connectors at both ends
White cable jacket
Nominal cable diameter: 6.2 mm
Max. connector diameter: 9 mm
Recommended through-hole: at least 9.5 mm
Model: RA350/18FME