Glomex Glomeasy RG8X coaxial cable with FME connectors is a 6 m low-loss 50-ohm cable for marine VHF, AIS, and DAB antenna systems. The cable is model RA350/6FME and is part of the modular Glomeasy system for installation on motorboats and sailboats.
The RG8X cable has lower signal loss than RG58 and is suitable for antenna installations where the signal must be routed between the antenna and the radio or receiver. Both cable ends are terminated with factory-fitted and over-molded FME female connectors, allowing standard installation to be performed without soldering, shortening the cable, or retrofitting connectors.
The cable has a nominal diameter of approximately 6.2 mm, while the external diameter of the FME connector is approximately 9 mm. The compact connector can be routed through a feed-through hole of approximately 9.5 mm in, for example, a deck, hull, or mast. When assembled correctly in the Glomeasy system, an O-ring seal is used at the antenna connection.
The cable is compatible with the Glomex Glomeasy antennas RA106SLSFME, RA106GRPFME, RA300, RA300AIS, and RA300DAB. It can also be used with antennas with item nos. 29.990.01, 29.990.02, and 29.990.03. For connection to a VHF radio with a PL259/SO239 system, adapter RA352 with item no. 29.990.20 can be used.
Two RG8X cables can be connected using the RA357 connector with item no. 29.990.23. For other connector systems, the documented adapters RA354 for N-male, RA355 for BNC-male, and RA356 for TNC-male are available.
Key features6 m low-signal-loss RG8X coaxial cable
Impedance: 50 ohms
Factory-fitted FME female connectors at both ends
For marine VHF, AIS, and DAB antenna systems
Cable diameter: approximately 6.2 mm
FME connector diameter: approximately 9 mm
Recommended feed-through hole: approximately 9.5 mm
White cable jacket
Model: RA350/6FME