Adjustable stainless steel antenna base from Glomex is a V9500 mounting base for satellite TV antennas and directional TV antennas. The base has an adjustment range of 0–5° and is used to level the antenna's mounting surface when the deck, arch, roll bar, or other solid mounting surface is not perfectly level.
The tilt is adjusted by loosening the central fastener and rotating or tilting the upper and lower parts of the base relative to each other. The design thus functions as both a fixed mounting base and a leveling joint. An opening through the base allows antenna cables to be routed hidden through the mount.
The base is manufactured from electropolished stainless steel with a silver, polished metal finish. It measures 240 mm in outer diameter and 80 mm in height. Mounting is performed through four holes with a diameter of 8.5 mm, spaced at 90° intervals on a bolt circle with a diameter of 212 mm.
Two synthetic rubber gaskets are included for contact and fitment between the base and the mounting surface. The mounting surface must be solid, rigid, and sufficiently large to support the weight and vibrations of the antenna.
The V9500 is intended for Glomex satellite TV antennas and directional TV antennas. It is used with, among others, NEO satellite antennas, Rhea V8100S2, and Mars 4 Skew NEO with part no. 29.923.62.
Key featuresAdjustable antenna base for uneven mounting surfaces
Adjustment range: 0–5°
Electropolished stainless steel
Outer diameter: 240 mm
Height: 80 mm
Four Ø 8.5 mm mounting holes on Ø 212 mm bolt circle
Option for cable routing through the base
Two synthetic rubber gaskets included
For satellite TV antennas and directional TV antennas