Coaxial deck gland for antenna cable from Glomex is a complete RA105U kit for routing RG58/U coaxial cable through boat decks, bulkheads, or walls. The gland creates a watertight and detachable connection, allowing the antenna cable to be disconnected at the deck, for example when the mast or antenna assembly needs to be removed.
The kit consists of a 2″/5 cm gold-plated PL-258 pass-through connector with two gold-plated nuts, a gold-plated PL-259 male connector, and a protective boot for the external connection. The included PL-259 connector is the Glomex RA132GOLD with a twist-on mount for RG58/U cable. The protective boot corresponds to Glomex RA138.
The gland is made of stainless steel and finished with a chrome-plated flange with a diameter of 45 mm. The thread length is 14 mm, and the design is intended for mounting through decks or bulkheads with a thickness of up to approximately 6 mm. The flange is secured with three countersunk M5 fasteners; mounting screws are not documented as being included.
The connection is intended for RG58/U coaxial cable with a nominal cable diameter of 6 mm. The combination of the PL-258 pass-through and the PL-259 connector makes the solution suitable for VHF radios, VHF antennas, AIS installations, and other marine radio equipment using the documented cable and connector type.
The gold-plated contact parts and nuts are combined with a chrome-plated flange and an external protective boot. The product has no documented numerical IP rating, but the connection is designed as a watertight deck gland.
Key featuresComplete deck gland kit for RG58/U coaxial cable
Gold-plated 2″/5 cm PL-258 pass-through connector
Included gold-plated PL-259 twist-on male connector
Two gold-plated nuts and external protective boot
Chrome-plated flange with 45 mm diameter
Mounting through deck or bulkhead up to approx. 6 mm
Fastening with three countersunk M5 fasteners
Watertight and detachable connection for VHF and AIS installations