This GLOMEX NEO satellite TV antenna, model Mars 4 Skew NEO, is an auto-tracking and gyro-stabilized DVB-S2 antenna for receiving Full HD and 4K satellite TV on board. The 60 cm dish operates under a UV-resistant radome and is designed for motorboats, yachts, and other vessels where the signal must be maintained while underway.
The antenna features automatic skew, which adjusts the LNB tilt according to the vessel's geographical position. This optimizes polarization and signal reception, even near the edge of the satellite's coverage area. The tracking system has a speed of 50°/sec, unlimited azimuth rotation, and an elevation range of 5° to 90°. Stabilization is achieved with a two-axis gyro plus a calculated third axis.
The universal quattro-LNB has four outputs and a frequency range of 10.7–12.75 GHz. Via a suitable multiswitch installation, the antenna can serve up to 16 TVs or satellite receivers simultaneously. The antenna gain is 36.5 dB at 12 GHz, the minimum EIRP is 47 dBW, and the satellite is identified using NIT data. Satellite receivers and decoders are not included.
Control and management are handled wirelessly via Bluetooth using the Glomex SAT TV App for iOS and Android. The app is used to select or switch satellites, update the antenna software and satellite list, and send operating parameters to technical support. The built-in GPS system stores previous navigation positions and supports automatic skew calibration. The initial calibration can take up to five minutes.
The radome measures 660 mm in diameter and 660 mm in height, while the dish itself has a diameter of 600 mm. The antenna is powered by 12/24 V DC and can be used at temperatures from –20 °C to +55 °C. The electronics and mechanics are designed for fast satellite locking and quiet operation during both searching and continuous tracking. After approximately two minutes of no boat movement, the system automatically enters standby and resumes tracking upon signal drop or a total course change of approximately 6°.
The antenna must be mounted on a solid, rigid, and horizontal surface with a clear view of the sky. Installation is performed using four M8 threaded rods, four holes drilled with an 8.5 mm drill bit, and a 28 mm cable entry hole. The orientation mark must face the bow, and a distance of at least 1.5 m must be maintained from transmitting VHF and radar antennas. The control unit and power supply unit must be placed in a dry and ventilated area. For sloped or uneven mounting surfaces, the adjustable support V9500 can be used. The V9804NTWIN is available as a matching twin/dummy radome.
The scope of delivery includes a 12/24 V control unit, four 10 m coaxial cables from the antenna, one 1.5 m coaxial cable, and a heavy-duty synthetic rubber gasket. The manufacturer number is V9804NSKEW. This model is the quattro version with four antenna cables and should not be confused with the separate dCSS/SCR version for single-cable installation.
Key featuresDVB-S2 reception for Full HD and 4K
Automatic satellite tracking at 50°/sec
Automatic skew with GPS-based calibration
Gyro-stabilization on two axes plus a calculated third axis
600 mm dish in a UV-resistant radome
Universal quattro-LNB with four outputs
Up to 16 TVs/receivers via multiswitch installation
Bluetooth control via app for iOS and Android
12/24 V DC power supply
Operating temperature from –20 °C to +55 °C