This Glomex Nashira AGC DAB 20 omnidirectional marine TV antenna is a black, active antenna for receiving terrestrial DVB-T/DVB-T2 TV and DAB radio on sailboats and motorboats. The omnidirectional design provides 360° reception and supports both horizontally and vertically polarized signals.
The antenna has a diameter of 370 mm and a total height of 495 mm with the DAB whip mounted. The black radome is made of UV-resistant ASA plastic, while the included shark fin is used for receiving vertically polarized TV signals. The base mounting diameter is 25 mm.
The included 50023/14 AGC amplifier automatically regulates gain based on the strength of the received signal. The amplifier is powered by 12/24 V DC and has one antenna input and two outputs, allowing the system to be connected to up to two TV sets. The amplifier also features LTE filtering and can be mounted discreetly in a dry and ventilated area of the boat.
The delivery includes the Nashira antenna, DAB whip, automatic AGC amplifier, 20 m coaxial cable between the antenna and amplifier, 1.5 m cable between the amplifier and TV or decoder, as well as a gold-plated V9144 F-male connector. The antenna's electrical termination is F-female, and the system impedance is 75 ohms.
The antenna should be mounted as high and as unobstructed as possible with no physical obstacles around the reception area. On sailboats, the optional V9173TV bracket can be used for masthead mounting, while V9172 is an optional base for deck or flat surface mounting. The coaxial cable should be routed without sharp 90° bends, and cable joints should be avoided as much as possible to limit signal loss.
AM/FM reception through the antenna system requires the optional V9147 splitter between the antenna and amplifier. The V9148 cable can be used for FM radio, while the DA390/1 connection can be used for DAB radio. The included 50023/14 amplifier is CE and FCC marked and covered by the EU Radio Equipment Directive 2014/53/EU.
Key featuresOmnidirectional 360° reception
DVB-T/DVB-T2 TV and DAB radio
Automatic AGC amplifier with two TV outputs
Supply: 12/24 V DC
Horizontal and vertical polarization
UV-resistant ASA radome
Ø370 mm and 495 mm total height
20 m coaxial cable and 1.5 m TV cable included
F-female termination and 75 ohm impedance
Black variant with manufacturer part no. V9112AGCU/DAB20/BK