Glomex Pandora V8001 satellite TV antenna for boats is a maritime parabolic antenna system for TV reception on sailboats and motorboats. The antenna is designed for use in port, while underway, and at anchor, and comes with a UV-resistant radome that protects the moving antenna unit.
The antenna is gyrostabilized on two axes with a calculated third axis and tracks the satellite at a tracking speed of 50° per second. The azimuth rotation is unlimited, while the elevation range is from -9° to +81°. Satellite identification is via NIT, and the system has three pre-loaded satellites: ASTRA 2 at 28° East, ASTRA 1 at 19° East, and HOTBIRD at 13° East.
The Prime Focus dish with HPD technology has a diameter of 390 mm and an antenna gain of 33 dB at 12 GHz. The universal LNB operates in the frequency range 10.7–12.75 GHz with linear horizontal and vertical polarization. Autoskew is not integrated, so the LNB skew must be adjusted manually when the sailing area requires it.
The SCC connection uses one coaxial cable between the antenna and the control system. A rotating joint prevents the cable from tangling during the antenna's azimuth rotation. The system has one decoder output and is intended for one separate satellite receiver. Satellite receiver and TV set are not included. The control unit supports software updates via SD card, and the quiet electric drives reduce noise during satellite tracking.
The radome measures 420 mm in diameter and 450 mm in height, while the antenna's product weight is 6 kg. The antenna is powered by 12 V DC, and the consumption is rated at 1.5 A/h. The power supply must be connected to a circuit with at least 5 A capacity. The operating temperature is -20 °C to +55 °C.
During installation, place the antenna as close to the boat's center and as low as practically possible, while ensuring a clear view of the sky. A distance of at least 1.5 m must be maintained from transmitting antennas such as VHF and radar, and the antenna must not be placed in the radar's horizontal radiation field. Mounting requires four holes drilled with an 8.5 mm drill bit as well as a 28 mm cable passage. The orientation mark must face the bow.
Scope of delivery
Pandora V8001 antenna unit 3.010.0013
Base gasket
Four mounting reinforcements
Four self-locking M8 nuts
Control unit with recessed frame
10 m cable between antenna and control unit
1.5 m cable between control unit and satellite receiver
Documented accessories include the V9500 mounting bracket with 0–5° tilt adjustment and the V9115 line amplifier for installations where the cable from the control unit to the satellite receiver exceeds 10 m. The universal mounting bracket with item no. 29.922.99 is also documented for this antenna.
The radome is cleaned with a soft cloth and fresh water. Do not use high-pressure cleaners, brushes, abrasives, or alcohol-based cleaning agents. The antenna must be turned off before cleaning, and the mounting should be checked before longer voyages.
Key featuresGyrostabilization on two axes with calculated third axis
390 mm Prime Focus dish with HPD technology
33 dB antenna gain at 12 GHz
Universal LNB for 10.7–12.75 GHz
Unlimited azimuth rotation and elevation from -9° to +81°
Three pre-loaded satellites
SCC connection with one coaxial cable
One output for separate satellite receiver
Software update via SD card
UV-resistant radome of Ø420 × 450 mm