This Glomex High Performance VHF antenna, model RA1225HP, is a 2.4 m long collinear marine antenna for VHF communication in the 156–162 MHz frequency range. The antenna is vertically polarized and designed for installation on motorboats, where a high-mounted antenna supports the VHF radio's line-of-sight communication.
The antenna has an average gain of 6 dB, a nominal impedance of 50 ohms, and a maximum input power of 100 W. The SWR is at most 1.3:1 at 156.8 MHz, and the antenna is DC-grounded. The vertical polarization reduces reflection effects from flat surfaces such as water.
The antenna tube is made of white, double-layer fiberglass with 1.2 mm reinforcement. The smooth polyurethane finish is high-gloss polished and UV-resistant. The internal antenna elements consist of helical copper conductors in brass tubes, while the mounting sleeve, cable gland, and 1"-14 mounting thread are made of stainless steel. The net weight of the antenna is 742 g.
Included is 7.6 m of RG-8X low-loss coaxial cable with a factory-fitted FME connector as well as a gold-plated FME/PL-259 male adapter. The connector system allows the antenna to be connected without soldering and without shortening the factory-fitted cable. The minimum bending radius of the coaxial cable is 6 cm.
The RA1225HP is compatible with all Glomex bases and is mounted via the standard 1"-14 thread. A mounting base is not included. The antenna should be placed as high as possible and positioned vertically. Keep at least 1 m distance from large metal objects, radar, TV, and GPS equipment, as well as other antennas, and route the coaxial cable away from power cables.
The included adapter has manufacturer part number RA352 and is available as a separate spare part under item no. 29.990.20. The adjustable four-way base RA107SSFME in electropolished AISI 316 stainless steel is documented as a separate mounting accessory.
Key featuresCollinear VHF marine antenna for 156–162 MHz
2.4 m antenna length and vertical polarization
6 dB gain and 50 ohm nominal impedance
Max. input power of 100 W
SWR at most 1.3:1 at 156.8 MHz
Double-layer, UV-resistant white fiberglass
7.6 m RG-8X low-loss coaxial cable
FME connector and FME/PL-259 adapter included
1"-14 stainless steel mounting thread
Compatible with all Glomex bases