This VHF/AM/FM/AIS antenna splitter from Glomex, model RA201, allows for sharing one existing 50 Ω VHF marine antenna between a maritime VHF radio, an AM/FM radio receiver, and an AIS receiver.
The active splitter allows the VHF transceiver to continue both transmitting and receiving, while the AM/FM radio and AIS receiver receive signals via the same antenna. The built-in preamplifier provides 15 dB of gain distributed between the two receiver outputs to compensate for signal loss when splitting the antenna signal. The AIS output is intended exclusively for an AIS receiver and must not be used with an AIS transponder or AIS transceiver that transmits.
The RA201 operates at 13.8 V DC nominal and accepts a supply of 10-16 V DC. The maximum power consumption is 25 mA, the impedance is 50 Ω, and the VHF section supports a transmit power of 0.2-100 W. AM/FM reception covers 100 kHz-200 MHz, while VHF transmission/reception and AIS reception cover 100-200 MHz.
The splitter's antenna input is an SO-239 female connector for an antenna cable with a PL-259 male connector. The three integrated signal cables are 60 cm long: RG-58 C/U with a PL-259 male connector for the VHF radio, RG-59 A/U with a Motorola male connector for the AM/FM radio, and RG-58 C/U with a BNC male connector for the AIS receiver. The integrated power cable is also 60 cm long, with a red wire for positive and a black wire for negative.
The housing measures 83 × 48 × 38 mm and is secured with four M4 screws. The surface has a metal epoxy coating that protects against rust and oxidation. A 5 × 20 mm, 315 mA glass fuse is included.
The VHF antenna must be connected before the splitter is put into use. The connections must not be swapped, and the polarity of the power supply must be observed. It is recommended to install a switch so that the power supply to the splitter can be disconnected. The product has a lifetime warranty for the original purchaser in accordance with the applicable warranty terms.
Key featuresActive sharing of one VHF antenna between VHF, AM/FM, and AIS
VHF transmission and reception up to 100 W
AIS connection exclusively for receiving AIS devices
Built-in preamplifier with 15 dB gain
Three integrated 60 cm signal cables with PL-259, Motorola, and BNC connectors
10-16 V DC supply range and max. 25 mA power consumption
50 Ω impedance
Compact housing of 83 × 48 × 38 mm
Mounting with four M4 screws
315 mA glass fuse included