This Glomex SUPERGAIN VHF antenna in the Capri model is a 1.4 m long marine antenna for VHF communication on powerboats and workboats. The antenna has an average gain of 3 dB and is intended for the 156–162 MHz frequency range.
The Capri has an impedance of 50 ohms, vertical polarization, and a maximum input power of 50 W. The standing wave ratio is a maximum of 1.4 at 156.8 MHz, and the antenna is DC-grounded.
The antenna elements are made of brass and copper and are protected inside a robust, white fiberglass tube. This construction gives the antenna a product weight of 230 g and protects the internal elements in the maritime environment.
The antenna comes with an integrated white articulated tilt base with a locking lever, so the position of the antenna can be adjusted during installation and use. The integrated 6 m RG58C/U coaxial cable allows for cable routing from the antenna to the VHF installation. The cable is terminated as a cable without a documented factory-installed connector.
As related accessories, there is the Glomex SGVPL259, a PL-259 connector for RG-58 coaxial cable. Glomex SGVCX100 is a related low-loss RG-58 coaxial cable of 100 m, but is not necessary for the included cable length of 6 m.
Important featuresMarine VHF antenna for powerboats and workboats
Frequency range: 156–162 MHz
Average gain: 3 dB
Max. input power: 50 W
Impedance: 50 ohms
SWR: ≤ 1.4 at 156.8 MHz
1.4 m white fiberglass tube
Integrated 6 m RG58C/U coaxial cable
Integrated white articulated tilt base
Manufacturer number: SGV140WH