This Gobius C external tank level sensor with micro-radar in the Basic version is a non-contact 12/24 V DC sensor for simple monitoring of the liquid level in a tank. The sensor is mounted on the outside of the top of the tank and measures from above without contact with the liquid. The Basic model is intended for discrete level indications such as empty, half-full, and full and does not provide a continuous analog signal.
The micro-radar has a measuring range for tank depths from 200 to 2000 mm, a measurement interval of 1 second, and a resolution of 1 mm. The tank geometry and liquid type are configured in the app so the system can be adapted to rectangular, irregular, as well as vertical and horizontal cylindrical tanks. Automatic calibration learns reflections from the tank, while motion damping reduces fluctuations from the boat's movements.
The sensor must be mounted on a horizontal part of the tank top with a clear view of the liquid surface and the tank bottom. Pipes or other objects in the measuring field may interfere with the measurement. When using tape mounting, the tank surface must be cleaned, and the sensor edge must be placed at least 35 mm from the edge of the tank. During calibration, the distance from the top of the tank to the liquid surface must be greater than approximately 150 mm.
On plastic tanks, the sensor is mounted with the pre-fitted 3M tape, and it can also measure through fiberglass. Micro-radar cannot measure through steel, stainless steel, or aluminum. For metal tanks, adapter 27.183.10 is used in an existing or new tank opening. The adapter is intended for 1¼″/SAE 5 standard openings of the Wema/KUS type. For S5 flanges, the adapter is combined with mounting flange 52.746.10.
Setup and calibration are performed from a phone via Bluetooth 5.0. The app is available for iOS and Android, can be used in Danish among other languages, and allows for the selection of liquid type, tank geometry, tank depth, volume, and alarm levels. The sensor is powered by 12/24 V DC and supports an actual voltage range of 9-28 V DC. Installation via a 100 mA fuse is recommended.
The sensor housing is made of green ABS and measures 95 mm in diameter and 43 mm in height. The product weight is 152 g including cable. A built-in status LED shows whether the sensor is active and measuring. The sensor also has a built-in temperature sensor and accelerometer.
The sensor can be used for common tank liquids such as fresh water, grey water, black water, diesel, gasoline, and oil. When working on tanks with fuel, the installation must be carried out by a competent person with regard to flammable vapors and applicable safety requirements.
Key featuresNon-contact level measurement with micro-radar
External top mounting without internal level sender
Basic model with discrete level indications
12/24 V DC with a permitted voltage range of 9-28 V DC
Measuring range for tank depths from 200 to 2000 mm
Bluetooth 5.0 configuration via app for iOS and Android
Supports regular and irregular tank geometries
For fresh water, wastewater, diesel, gasoline, oil, and other liquids
95 mm diameter and 43 mm height
Green ABS housing with status LED