This Guardian fuel level gauge 10–180 Ω with white dial and white bezel is an analogue instrument for monitoring the fuel level in a 12 V DC system. The gauge is used in conjunction with a resistive fuel level sender with a characteristic of 10–180 Ω and displays the level from empty tank to half and full tank.
The instrument features natural-coloured backlighting and terminals +, −, S and L. Plus and minus are used for the power supply, S is connected to the fuel level sender, and L is connected to the instrument lighting positive circuit. Connection is made using separate 6.35 × 0.8 mm Faston terminals and multi-strand, insulated cable approved for marine use. The positive supply must be connected to a 12 V DC circuit activated via the ignition switch.
The robust instrument housing is made of nylon and fibreglass and features scratch-resistant glass. The construction is completely waterproof, although no specific IP rating is stated. The instrument is magnetically shielded but should still be placed as far as practically possible from other magnetic fields.
The front has an outer diameter of 59 mm, and the specified instrument depth P is 45 mm. The instrument body is shown as Ø52 mm, while the installation instructions prescribe a panel cutout of Ø56 mm. Therefore, please check the physical instrument and installation method before cutting the panel. The bayonet-mounted bezel can be replaced, and the system supports panel mounting with automatic attachment or standard brackets. It can also be mounted from the back of the panel, allowing the glass to sit flush with the dashboard.
A chrome-plated Guardian bezel with Ø59 mm can be purchased as an option under item no. 27.455.02. The battery must be disconnected during installation and may only be reconnected once the wiring work is completed.
Key featuresAnalogue display of fuel level
For 12 V DC systems
Sender signal: 10–180 Ω
White dial and white replaceable bezel
Natural-coloured instrument lighting
Scratch-resistant glass and nylon/fibreglass housing
Completely waterproof construction without specified IP rating
Front diameter: 59 mm
Panel cutout according to installation instructions: Ø56 mm
CE-marked marine instrument