This Guardian oil pressure gauge is an analogue engine instrument for displaying oil pressure from 0 to 10 bar. The instrument is intended for 12 V systems and allows the operator to continuously monitor the engine's oil pressure.
The version has a white dial, a white bezel, and neutral instrument illumination. The light dial provides a clear contrast to the scale and pointer, while the scratch-resistant instrument glass protects the display during use.
The instrument housing is made of robust nylon and glass fibre. The construction is 100% waterproof, though no formal IP rating is specified. The movable bezel is mounted with a bayonet fitting and can be replaced. A chrome-plated bezel with item no. 27.455.02 can be used as an alternative to the standard white ring.
The oil pressure gauge is intended for panel mounting and has an external front diameter of 59 mm. Installation requires a panel hole of Ø52 mm, and the instrument depth is 45 mm. The Guardian design supports both screw-ring mounting and flush mounting, where the instrument glass can be positioned flush with the panel.
Sensor and connection
The instrument is used in conjunction with a VDO oil pressure sensor with a measuring range corresponding to the 0–10 bar scale. The sensor system has a signal range of 10–184 Ω. The choice of sensor depends on the engine's thread as well as the requirement for earth through the sensor housing, insulated poles, or alarm contact.
10 bar sensors with 1/8-27 NPT include item nos. 27.502.00, 27.563.00, and 27.565.00. Sensors with M10×1 include item nos. 27.503.00, 27.507.00, and 27.562.00. Check thread and electrical configuration before installation.
Key featuresAnalogue measurement of engine oil pressure
Measuring range: 0–10 bar
Voltage: 12 V
White dial and white bezel
Neutral instrument illumination
External diameter: 59 mm
Panel hole: Ø52 mm
Depth: 45 mm
Panel mounting with replaceable bayonet bezel
For VDO oil pressure sensors with signal range 10–184 Ω