Guardian water temperature gauge 40–120 °C, white, 12 V

Mærke: Osculati SKU: 27.531.01

Price:
Sale price215,00 kr

Description

This Guardian water temperature gauge with white dial and white bezel is an analogue marine instrument for monitoring engine cooling water temperature. The gauge operates on 12 V DC and has a measuring range of 40–120 °C.

The analogue needle provides a direct temperature reading, and the dial features markings in both °C and °F. The instrument lighting is connected separately via the L terminal, allowing the scale to be illuminated along with the boat's other instruments.

The instrument has +, -, S, and L terminals. Positive is connected to an ignition-switched 12 V DC circuit, negative is connected to ground, and S receives the signal from the engine-mounted temperature sender. Separate 6.35 × 0.8 mm Faston terminals and multi-stranded, insulated cable approved for marine use are used.

The gauge is used with a separate VDO temperature sender, which must electrically match the sender characteristic of 51 Ω at 90 °C. The connection diagram is based on a single-pole sender that receives its ground through the sender housing and engine block.

The front diameter is Ø 59 mm, the rear housing is Ø 52 mm, and the specified installation depth is 45 mm. The total axial dimension including rear connections is 61.5 mm. The prescribed panel hole is Ø 56 mm, although a specified hole dimension of Ø 52 mm is also mentioned. Therefore, check the instrument's rear housing and mounting system before cutting the panel.

The housing is made of nylon/fibreglass and features scratch-resistant instrument glass as well as an interchangeable, bayonet-mounted bezel. The instrument is magnetically shielded but should still be mounted as far as possible from strong magnetic fields. The battery must be disconnected during installation. A chrome-coloured bezel with item no. 27.455.02 can be used as an optional accessory. Water temperature sender 27.792.00 is a possible related sender, but sender thread and electrical characteristics must be checked against the engine installation.

Key features

Analogue measurement of engine cooling water temperature
Measuring range: 40–120 °C
Voltage: 12 V DC
White dial and white bezel
Scale with °C and °F markings
Front diameter: Ø 59 mm
Installation depth: 45 mm
Sender characteristic: 51 Ω at 90 °C
Separate connection for instrument lighting
CE-marked marine instrument

Did you know?

... that many of our products can be ordered online and picked up in our self-service stores?

See more here: Self-service stores

Did you know

... that many of our items can be ordered online and picked up in our self-service stores?

See more here: Self-service stores

Alpina Marineudstyr

Ask us about the product

Send us your question. The product will automatically be included in your message.

Guardian water temperature gauge 40–120 °C, white, 12 V
Guardian water temperature gauge 40–120 °C, white, 12 V Item no. 27.531.01

Description

Produkt: Guardian vandtemperaturmåler
Serie: Guardian
Produkttype: Analog marine-vandtemperaturmåler
Anvendelse: Måling af motorkølevandets temperatur
Volt: 12 V DC
Temperatur: 40–120 °C
Dybde: 45 mm
Udvendig diameter: Ø 59 mm (front)
Baghusdiameter: Ø 52 mm
Samlet aksial dimension: 61,5 mm inklusive bagtilslutninger
Paneludskæring: Ø 56 mm
Materiale: Hus i nylon/glasfiber med ridsefast instrumentglas
Farve: Hvid skive og hvid frontring
Skalatype: Analog viser
Skala: °C og °F
Følerkarakteristik: 51 Ω ved 90 °C
Terminaler: +, -, S og L
Elektriske stik: Faston 6,35 × 0,8 mm
Montering: Instrumentpanel
Certificering: CE-mærkning
Kompatibilitet: 12 V marineinstallation og separat VDO-temperaturføler med passende karakteristik

Similar products

Recently viewed products