This 90° bronze pipe elbow with female threads at both ends from GUIDI is a robust F-F/female-female threaded fitting for marine piping systems. It is used to change the direction of the piping or fluid flow by 90° and can be used in water, cooling, and other installations on board leisure and commercial vessels.
The fitting is manufactured in bronze, including CC499K and CuSn5Zn5Pb5 types. It is suitable for maritime environments with salt water and fresh water, as well as for the passage of drinking water, where the chosen variant and the other requirements of the installation must be assessed. A rounded internal geometry supports water flow and helps to reduce pressure loss, turbulence, air bubbles, and the risk of cavitation.
The threaded connections follow BSP/BSPP and EN 10226/1 (BS 21). Parallel threads do not necessarily seal on their own, and the joint must therefore be sealed using a suitable method, such as sealant, gasket, or O-ring depending on the installation. The counterpart must have a compatible male thread. BSP and NPT threads must not be mixed, as they are not mutually compatible.
The product belongs to the GUIDI 0090B series and is manufactured in Italy. Variant-dependent technical drawing dimensions include A from 11 to 28 mm and H from 19 to 78 mm. The documented pressure resistance is up to 40 bar for relevant variants. The product weight varies by execution from 60 to 877 g. Use compatible bronze components throughout the installation to limit the risk of galvanic corrosion and inappropriate material mixing.
Key features90° pipe elbow for marine piping systems
F-F/female-female connection with internal thread at both ends
Bronze, including CC499K and CuSn5Zn5Pb5-C according to UNI EN 1982
BSP/BSPP thread according to EN 10226/1 (BS 21)
Suitable for water, cooling, and drinking water systems
Pressure resistance: up to 40 bar for relevant variants
Series: GUIDI 0090B
Manufacturer part numbers: 0090B.200002–0090B.200011
