This front-opening double-chamber refrigerator from the Isotherm Cruise Inox series is model CR200 with a total gross capacity of 200 l. The unit features two side-by-side compartments with separate front doors: a 150 l refrigerator compartment and a 50 l freezer compartment. It is designed for maritime installation under a worktop and operates on 12/24 V DC.
The freezer compartment can maintain a temperature down to -12 °C and is intended for the storage of already frozen goods. The temperature is adjusted steplessly via the thermostat, and a normal temperature of 5-6 °C is recommended for the refrigerator compartment. The cooling system utilizes a fan-cooled Danfoss/Secop BD50F compressor and R134a refrigerant in a hermetically sealed circuit.
The front, doors, and handles are made of stainless steel. The three-sided, flush-mount installation frame in stainless steel provides an integrated fit, where the doors sit flush with the flange. Both doors close with recessed snap locks. The door opening direction cannot be reversed on the CR200.
The stated external dimensions are 735 mm in width, 620 mm in depth, and 880 mm in height. The cabinet size is specified as 730 × 868 × 620 mm, while the installation reference for the opening is 735 × 873 mm. The unit is installed horizontally and secured through the mounting flange. The permanent inclination during operation must not exceed 30°.
Ventilation must be ensured around the unit, as insufficient air circulation increases power consumption and reduces cooling performance. As an installation reference, 20 mm clearance is normally required on sides without a compressor, and 50 mm on the compressor side and top area. The installation site must be dry, protected from water splashes, and placed away from gas and LPG cylinders.
The documented energy consumption is 800 W/24 h at 12 V, +5 °C in the refrigerator compartment, and +25 °C ambient temperature. The compressor features automatic low-voltage protection. The condenser must be kept free of dust, and manual defrosting is recommended at a frost layer of approximately 3-4 mm. During extended periods of inactivity, the unit should be defrosted, cleaned, and dried, after which the power is disconnected and the doors are left slightly ajar.
Key featuresTotal gross capacity of 200 l
150 l refrigerator compartment and 50 l freezer compartment
Two separate, side-by-side front doors
Freezer temperature down to -12 °C
12/24 V DC supply
Fan-cooled Danfoss/Secop BD50F compressor
Stainless steel front, doors, handles, and installation frame
Three-sided flush-mount installation frame
Recessed snap locks
CE-marked and climate class ST
