Detachable universal tender holder from Kiwi Marine is an adjustable support unit for the support and storage of tenders, inflatables, dinghies, jet skis, as well as keels and centerboards. This variant features a double offset arm, a flat support, and a load capacity of 70 kg per holder unit.
The holder is manufactured from AISI 316 stainless steel and features support surfaces with a non-slip rubber coating. The rubber coating provides contact between the holder and the supported hull, while the universal design makes the holder suitable for various bottom and hull shapes.
The detachable design makes it possible to remove the holder part from the installed bases. Angle and position can be adjusted in a single movement without having to move the bases. The holder part is inserted into a fixed deck socket with four countersunk mounting holes.
The flat support surface measures 115 × 85 mm. The height above the upper base flange can be adjusted from 130 to 230 mm, while the insertion depth below the flange is 105 mm. The total height is approx. 235–335 mm, and the base flange width is 90 mm.
The holder is manufactured in Italy. The capacity of 70 kg applies to the individual holder unit; the required number of holders and the installation itself must be dimensioned according to the load and the construction of the mounting location.
Key featuresDetachable base
Double offset arm
Flat, non-slip rubber-coated support
Load capacity of 70 kg per holder unit
AISI 316 stainless steel
Adjustable without moving the installed bases
Support surface of 115 × 85 mm
Adjustable height above flange of 130–230 mm
For tenders, dinghies, jet skis, keels, and centerboards
