This fuel level gauge with adjustable float sender is a complete analog system for monitoring fuel levels in petrol and diesel tanks. The kit is intended for 12 V installations and consists of a panel instrument and a mechanical arm sender with a float.
The instrument operates with a sender characteristic of 240–33 Ω and displays the tank level with an analog needle. The black instrument dial and bezel are marked with "FUEL," and the instrument has a separate electrical connection for panel lighting. The design is waterproof, although no specific IP rating is documented.
The instrument has a nominal diameter of 52 mm, an outer diameter of approx. 59 mm, and an installation depth of 45 mm. It is mounted in the instrument panel and connected to the sender, ignition positive, battery negative, and instrument lighting.
The included arm sender can be adapted to tanks with a depth of 130–660 mm. Both the horizontal length of the float arm and the vertical position of the sender are adjusted according to the tank depth. The sender is mounted using an international 5-hole flange with a diameter of 70 mm, five screws, and a gasket between the flange and the tank. The pivot point must be positioned so that the float arm can move freely throughout its entire range of motion.
For electrical installation, the sender output is connected to the instrument's signal terminal, while the sender's ground is connected to the engine or system ground. If an additional flange is installed between the sender and the tank, the thickness of the flange must be taken into account when setting the vertical position of the sender. The instrument can also be used with separate 240–33 Ω S5 senders in several documented length variants between 15 and 120 cm; these are not included.
The fuel tank must be emptied, removed, and thoroughly cleaned before the sender is installed or adjusted. The work must be carried out in a well-ventilated area free of open flames, sparks, cigarettes, or other ignition sources, as petrol vapors are explosive.
Key featuresComplete analog fuel level gauge with instrument and float sender
For 12 V installations
Sender characteristic: 240–33 Ω
For petrol and diesel tanks
Adjustable for tank depths of 130–660 mm
Analog needle display with FUEL marking
Instrument diameter: 52 mm
International 5-hole flange, Ø 70 mm
Separate connection for panel lighting
Waterproof design