Complete Cruiser shore power kit with electrical panel for connecting the boat's 230 V installation to a shore power pedestal. This variant is rated for 16 A and comes with a boat inlet, pre-wired electrical panel, and a 15 m shore power cable.
The electrical distribution panel is designed for mounting below deck and can be installed in any position. The panel features an RCD (residual current device), a thermal-magnetic circuit breaker, and a Schuko socket with a cover on the side. The housing is made of white ABS, the door has an IP65 protection rating, and the panel is supplied with a fixed 3 m 3G cable.
The boat inlet has a stainless steel lid and a nylon PA6 base. The Cruiser plug connection uses a rotating locking ring that secures the plug into the boat inlet and supports a watertight seal. The Cruiser connection is IP67 rated and complies with IEC 60309-5.
The included 15 m shore power cable has three conductors with a cross-section of 3 × 2.5 mm² and an outer cable diameter of 11.2 mm. The boat side has a Cruiser plug, while the pedestal side is equipped with a 16 A three-pin male plug made of UV-stabilized polycarbonate with a cable sleeve and integrated strain relief. The shore plug has an IP44 protection rating.
The set includes an electrical panel with item no. 14.737.16 and a shore power cable with item no. 14.416.25. The cable's shore plug is item no. 14.335.01. The individual protection ratings apply to the respective components and should not be confused: Cruiser connection IP67, electrical panel IP65, and shore plug IP44.
Key featuresComplete shore power kit for boat and shore power pedestal
230 V and 16 A
15 m shore power cable with 3 × 2.5 mm² conductors
Boat inlet with stainless steel lid and nylon PA6 base
Electrical panel with RCD and thermal-magnetic circuit breaker
Schuko socket with cover
3 m fixed 3G panel cable
IEC 60309-5
Cruiser connection with IP67
