This KUS NS5 NMEA 2000 fuel level sensor is a 225 mm vertical tank sender for electronic measurement of fuel levels. The sensor provides level data directly to an NMEA 2000 network and is compatible with 12/24 V systems.
The level measurement is based on reed switch and magnetic field technology, where the float is the only moving measurement component. This design provides a measurement resolution of 10-21 mm depending on the float position and the sensor's design. The sensor housing is made of stainless steel and has an IP65 protection rating.
The sensor is mounted with an international SAE 5-hole flange, also known as an S5 flange. The flange diameter is 54 mm, and the installation requires a tank opening of Ø36-42 mm as well as five mounting holes for M5 screws. The asymmetrical hole placement follows the SAE pattern with angles of 68° and 72°.
Connection is made to a T-adapter in the boat's NMEA 2000 network. The network plug must be inserted fully, and the locking ring tightened to secure the connection. The sensor transmits the level signal directly to the network without the need for a separate analog-to-NMEA converter.
Upon delivery, the sensor is configured for fuel. The tank capacity can be programmed so that a compatible instrument can display the contents in liters instead of just a percentage. When installing multiple fuel tanks, each sensor can be assigned a tank number so that the tanks can be distinguished on the network.
The sensor can be reprogrammed for fuel, fresh water, grey water, or black water using the NMEA 2000 programming tool with part no. 27.165.00. The tool can also be used to set tank capacity and tank number via the network.
Key features225 mm vertical fuel level sensor
NMEA 2000 network output
Compatible with 12/24 V systems
Reed switch and magnet-based measurement principle
Stainless steel housing
IP65 protection rating
International SAE 5-hole flange
Tank opening of Ø36-42 mm
Programmable with tank capacity and tank number
NMEA 2000 certified