Magnetic safety switch in a round design for flush mounting is used for magnetic position detection and safe interruption of an electrical circuit. The two-part construction consists of a wired sensor part and a separate magnet/actuator part.
The circuit opens at a distance of 15 mm between the two parts. The switch is rated for 0.5 A, while system voltage and contact configuration are not specified.
The round variant is made of ABS and intended for flush mounting. Adhesive attachment makes installation simple without separate screw fastening. The product dimension is Ø19 × 23 mm; a separate dimension for the mounting hole is not provided.
The switch can be used as a safety or limit switch for wet bars and bar areas on board with electric cooking appliances, hydraulic or electric gangways, as well as electrically operated tables.
Key featuresMagnetically activated safety switch
Two-part construction with sensor and magnet/actuator
Circuit opening at 15 mm distance
Current rating: 0.5 A
Round design in ABS
For flush mounting
Adhesive attachment
Product dimensions: Ø19 × 23 mm
