Marina TOP waterproof rocker switch with dual LED is a single-pole ON-OFF-ON switch for panel mounting in 12/24 V DC electrical boat systems. The three fixed switch positions allow for selection between two separate circuits with a neutral OFF position in the middle. The variant is intended for navigation lights, bilge pumps, and similar installations with two selectable outputs, among other uses.
The switch has four terminals and a maximum load of 20 A at 12 V or 10 A at 24 V. Terminal 2 is used as a common positive supply, terminal 7 as a negative connection for the LED circuit, while terminals 1 and 3 function as the two switched outputs. In one ON position, the supply is connected to one output, and in the other ON position, it is connected to the other output.
The two red LEDs each have their own function. One provides constant illumination of the symbol on the separately mounted rocker, while the other indicates when the switch is activated. The switch is supplied without the external symbol rocker, so an appropriate Marina TOP OVAL rocker must be selected separately according to the function of the installation.
The enclosure rating is IP56. The switch is installed via snap/panel mounting in a rectangular cutout of 21.5 × 36.8 mm. The common Marina TOP switch format measures 24.4 mm in width, 48.97 mm in height, and 52 mm in depth.
Compatible symbol rockers
Among others, separate OVAL rockers can be selected for navigation lights (14.213.21), anchor/mooring lights (14.213.22), bilge pump (14.213.27), neutral without symbol (14.213.29), bilge pump 2 (14.213.30), instrument/panel lighting (14.213.31), cockpit/cabin lighting (14.213.33), windlass (14.213.34), lights (14.213.38), cabin lighting (14.213.45), gangway/underwater/spreader lights (14.213.49), and deck/courtesy lighting (14.213.50). There are also rockers available for horn, trim tabs, exhaust fan, windshield wiper, pressurized water pump, and hatch or door opening.
Key featuresSingle-pole ON-OFF-ON switch with three fixed positions
Selection between two separate circuits with center-OFF
For 12/24 V DC electrical systems
Max. load: 20 A at 12 V and 10 A at 24 V
Four terminals
Two red LEDs for symbol illumination and activation indication
IP56 enclosure rating
Snap/panel mounting in a 21.5 × 36.8 mm cutout
Supplied without symbol rocker
