This modular fuse and busbar system is base module 1 with six fuse slots for the distribution and protection of electrical circuits in 12/24 V installations. The module is designed for standard ATP, ATO, and ATC blade fuses and features Faston connectors.
Each fuse slot has a separate status LED, allowing individual fuse positions to be monitored visually. The maximum load is 20 A per fuse, while the total load for the fuse holder and any connected modular configuration must not exceed 100 A.
Base module 1 can be used alone or connected with additional base module 1 units. It can also be combined with base module 2, item no. 14.182.02, which is a 12-pole negative busbar. The modular design makes it possible to adapt the power distribution to the number of circuits in the installation within the maximum total load.
The module measures 86 × 78 × 41 mm and visually consists of a black base with a transparent cover. Four mounting holes, located near the corners, are used for fastening. The exact size of the Faston terminals and the distance between the mounting holes are not specified.
A set of self-adhesive labels with various designations for labeling and identifying the circuits is included. Fuses are not documented as part of the package and must be selected according to the load of each individual circuit.
Key featuresBase module 1 with 6 fuse slots
For standard ATP, ATO, and ATC blade fuses
12/24 V system voltage
Max. 20 A per fuse
Max. 100 A total load
Status LED at each fuse slot
Faston connectors
Can be connected with other base modules
Dimensions: 86 × 78 × 41 mm
Self-adhesive marking labels included
