This Navy Load stainless steel built-in gas hob, model NL.22000, features one gas burner and an extra compact design for flush mounting into a countertop. The hob measures 323 × 263 mm externally and requires a cutout of 305 × 245 mm.
The burner has an output of 1750 W and is regulated via the control knob. Ignition is manual, and the integrated safety thermocouple automatically shuts off the gas supply if the flame goes out. The hob can be used with butane, LPG, and propane at the correct gas pressure: 28–30 mbar for butane/LPG and 37 mbar for propane.
The cooking surface is made of polished AISI 304 stainless steel. It is fastened with four screws through the corners, and fixing screws are included. The gas connection consists of a smooth stainless steel inlet pipe with an 8 mm outer diameter, intended for an 8 mm RSV biconical compression fitting.
The compact gas hob is intended for fixed kitchen installations in boats, motorhomes, caravans, and campervans. Installation must be carried out in accordance with applicable gas installation and ventilation regulations, and with a regulator suitable for the chosen gas type and specified operating pressure.
The model is supplied without a glass lid. There is a mounting point for an optional pan support; the corresponding single pan support has item no. 50.100.91 and is not documented as included.
Key featuresOne gas burner with an output of 1750 W
External dimensions: 323 × 263 mm
Installation dimensions: 305 × 245 mm
Polished AISI 304 stainless steel
Safety thermocouple with automatic gas shut-off
Manual ignition and regulation via control knob
For butane/LPG at 28–30 mbar and propane at 37 mbar
8 mm stainless steel gas inlet pipe for biconical compression fitting
Flush mounting with four fixing screws
CE-approved and manufactured according to EN 30
