This built-in gas hob with sink, glass lid and mixer tap from NavyLoad combines two gas burners and a right-hand sink in one integrated unit. It is designed for compact kitchen installations in boats, motorhomes, caravans and campervans.
The unit is made of stainless steel and has a smoked tempered glass lid. The included mixer tap is designed for hot and cold water. When the glass lid is closed, the cooking and washing area is covered.
The two gas burners have an output of 1,800 W and 1,000 W respectively, corresponding to a total nominal output of 2,800 W. Mechanical piezo ignition means that ignition does not require an external electrical connection. Thermocouple safety protection prevents accidental gas leakage if the flame goes out. The unit can be used with butane at 28–30 mbar, LPG at 30 mbar or propane at 37 mbar.
The external dimensions are 726 × 346 mm, while the specified internal dimensions are 688 × 319 mm. The documented installation cutout is 700 × 315 mm, and the installation depth is 140 mm. The product's net weight is 8 kg. The gas connection consists of a reinforced inlet pipe with an 8 mm external diameter, designed for an RSV8 compression fitting.
Installation is carried out by fitting into a countertop, where there must be sufficient space below the unit for gas pipes and the sink drain. A distance of at least 100 mm to side walls and other heat-sensitive vertical surfaces is recommended. The unit can be secured with a suitable adhesive and sealant.
The sink drain hole is Ø 70 mm. A drain valve or waste fitting is not included, and the installation also requires a suitable drain hose. A double pan support with item no. 50.100.92 is available as documented optional equipment.
Key featuresCombined gas hob and right-hand sink
2 gas burners with a total output of 2,800 W
Mechanical piezo ignition without external power connection
Thermocouple safety protection against accidental gas leakage
Stainless steel construction
Smoked tempered glass lid
Mixer tap for hot and cold water included
External dimensions: 726 × 346 mm
Installation cutout: 700 × 315 mm
CE approved
