This NMEA 2000 fuel level sensor with S5 flange has a sensor length of 150 mm and is intended for electronic monitoring of the fuel level in a boat tank. The sensor is supplied pre-programmed for fuel and sends level data directly to an NMEA 2000 network.
The sensor is compatible with both 12 V and 24 V systems. By default, the level is displayed as a percentage. Once the tank capacity is configured, the level can be displayed as a volume in liters instead. When installing multiple fuel tanks, each sensor can be assigned a tank number, such as tank 1, 2, or 3.
Mounting is performed using an international SAE 5-hole flange in S5 format. The listed sensor length is 150 mm and must be selected based on the depth of the tank. The sensor housing is made of stainless steel and has an IP65 protection rating.
The sensor's tank type, tank number, and tank capacity can be changed with the NMEA 2000 level sensor programmer 27.165.00. The programming can, among other things, change the detected media type to fresh water, gray water, or black water. This product is the fuel-programmed variant.
The sensor is designed for tanks with an international SAE 5-hole/S5 mounting flange and for integration into an existing NMEA 2000 network. Check the tank's mounting flange and depth before selecting the sensor length.
Key featuresProgrammed for fuel level measurement
Sensor length: 150 mm
NMEA 2000 output signal
Compatible with 12/24 V systems
International SAE 5-hole flange in S5 format
Stainless steel sensor housing
IP65 protection rating
Configurable tank type, tank capacity, and tank number
Level display in percentage or liters depending on configuration