This NMEA 2000 black water tank level sensor in the S5 series has a sensor length of 200 mm and is programmed for black water level monitoring on board. The sensor transmits the tank level and the configured media type to a compatible NMEA 2000 instrument.
The sensor is compatible with 12/24 V systems and integrates into the boat's NMEA 2000 network. The level can be displayed as a percentage, and if the tank capacity is configured, a compatible instrument can display the tank content in liters instead. For installations with multiple black water tanks, the sensor can be assigned a tank number, such as tank 1, 2, or 3.
The 200 mm long sensor features a stainless steel housing and IP65 protection rating. Mounting is performed using an international SAE 5-hole flange, making it suitable for tanks with the corresponding flange pattern.
The supplied variant is configured for black water, but with the NMEA 2000 programming tool item no. 27.165.00, the media type can be changed to fuel, fresh water, grey water, or black water. The tool can also be used to set the tank capacity and tank number. Programming is performed through the NMEA 2000 network via Micro-C connection and can be done without physical access to the sensor itself.
When ordering and configuring, tank capacity and tank number should be provided if the level is to be displayed in liters or if multiple tanks with the same fluid type are installed on board.
Key featuresProgrammed for black water level monitoring
Sensor length: 200 mm
NMEA 2000 output signal
Compatible with 12/24 V systems
Stainless steel housing
IP65 protection rating
International SAE 5-hole flange
Can be configured with tank capacity and tank number
Can be reprogrammed with programming tool item no. 27.165.00