This NMEA 2000 S3 black water tank level sensor has a sensor length of 225 mm and measures the level in the vessel's black water tank. This variant is supplied pre-programmed for black water and transmits level data via an NMEA 2000 network to a compatible instrument or display.
The sensor is intended for use in both 12 V and 24 V electrical systems. By default, the tank level is displayed as a percentage. Once the tank capacity is configured, the connected instrument can instead display the calculated volume in liters.
The tank media type, number, and capacity can be reprogrammed using the NMEA 2000 programmer (item no. 27.165.00). Tank numbering makes it possible to distinguish between multiple tanks with the same type of liquid on board. The sensor can also be reprogrammed for gray water, fresh water, or fuel, among others, but this variant is supplied configured for black water.
The construction is made of stainless steel and features an international S3 flange for mounting on a compatible tank connection. The external part has an IP65 protection rating. For a tank prepared for a five-hole S5 flange, the mounting adapter (item no. 52.746.10) can be used.
The documented sensor length is 225 mm. Check the tank depth, flange type, and the desired tank configuration before installation.
Key featuresLevel sensor for black water tank
NMEA 2000 output
Sensor length: 225 mm
For 12 V and 24 V systems
International S3 flange
Stainless steel
External protection rating IP65
Can be configured with tank type, tank number, and tank capacity
Option to display in liters after configuration